Technical data PELLEMATIC®

Product catalog summary

Overview: The document provides technical specifications for the PELLEMATIC SmartXS series of boilers, ranging from 10 to 18 kW. It includes detailed information on energy efficiency, operational parameters, dimensions, and installation requirements.

Specifications:

Boiler Power: Models range from 10.3 kW to 18 kW with a partial load of 3.1 kW across all models.
Energy Efficiency: Rated as A++ with an energy efficiency index (EEI) ranging from 131 to 131.5.
Boiler Efficiency: In condensation mode, efficiency is over 100%, while in standard heating mode, it ranges from 95.4% to 95.7%.
Temperature Ranges: Boiler temperature is controlled between 28°C and 90°C, with a minimum return temperature of 5°C.

Water and Flue Gas Parameters:

Water Capacity: 335 liters with specific connections for feed and return.
Flue Gas: Temperature ranges from 40°C to 90°C depending on the mode, with specific volume outputs for rated and partial loads.

Dimensions and Weight:

Overall Dimensions: Width 1040 mm, Height 1820 mm, Depth 850 mm.
Weight: Gross weight is 160 kg, with options to reduce weight for transport.

Electrical Components:

Connection: 230VAC / 50Hz with various power requirements for components like the vacuum turbine and flue gas fan.

Installation Requirements:

Clearance: Minimum clearances are specified for safe and efficient installation.
Transport: Guidelines for reducing dimensions and weight for easier transport are provided.

Fuel Specifications:

Pellets: Made of 100% natural wood, conforming to EN ISO 17225–2, class A1.

Notes: The document emphasizes compliance with local legislation regarding installation and operation.

Catalog excerpts

Technical data PELLEMATIC® SmartXS 10 – 18 kW

Open the catalog to page 1

Notes on bringing the unit into the building If an upright, ground-level transport of the Pellematic Smart XS to the installation location is not possible with a width of 85cm, certain components must be removed. This reduces the transport dimensions and weight and permits practicable transport to the installation location. You need several persons for transport to the installation location. Minimum door width — max. unit dimension Before bringing the unit into the building, check the dimensions of all doors to ensure that the boiler has sufficient clearance and can be set up properly. Smart...

Open the catalog to page 5

Author OkoFEN Forschungs- &. EntwicklungsgesmbH A-4133 Niederkappel, Gewerbepark1 Tel.: +43 (0) 72 86/74 50 Fax.: +43 (0) 72 86 / 74 50 - 10 E-Mai|: oekofen@pe||etsheizung.at © by OkoFEN Forschungs- und EntwicklungsgesmbH www.oekofen.com Subject to modifcations

Open the catalog to page 6

Technical data PELLEMATIC®

Technical data PELLEMATIC®

Catalog excerpts

All ÖkoFEN catalogs and technical brochures