PELLET HEATING

echnical data PELLEMATIC Smart 4–8kW Designation Boiler-rated power Boiler-partial load Boiler efficiency rated power Boiler temperature Combustion chamber temperature System always runs at rated load 100,0 Water area Water capacity Water supply/return - dimensions Water supply diameter Drinking water heat exchanger Solar plate heat exchanger Freshwater module – bulk power 25 l/min at min. 60°C Accumulator temp. / 45°C DHW Temp Max. operating pressure Test pressure Fresh water module Solar plate heat exchanger Flue gas area Available dépression flue gas fan Flue gas temperature rated power Flue...

Maximum unit dimension Tilt hight Weights Weight packed on the pallet with wooden frame Weight without water, fully equipped, not packed Gross weight without additions, not packed Volume hopper Electrical Components Connection value - Suction system Main Drive Drive Motor Suction Turbine Electrical Ignition Cleaning Motor Thermal insulation Glass wool – lambda value 0,035 W/mK Fuel Pellets made of 100% natural wood according to EN 14961–2, class A1 Colorific value Bulk density Water content Emissions acc. to test reports O2-contents rated power Reference 10% O2 dry (EN303-5) CO rated power Dust...

Dust rated power WB Federal Institute of Agricultural Engineering Wieselburg 1) The resistance in the flue system at the connection SMART must be 5 Pascal, if the connection pipe and the transition to the chimney are executed pressure tense. Intermediate sizes according to ÖNORM EN303-5 — 5.1.3 - values are averaged BLT-protocol number: 0653/10 PE Smart 6,0 — Date of issue: 16.08.2010 BLT-protocol number: 023/10 PE Smart 3,9 Date of issue: 13.07.2010 BLT-protocol number: 024/10 PE Smart 7,8 Date of issue: 13.07.2010 Technical Data PELLEMATIC®Smart 4 — 14 kW

Technical data PELLEMATIC Smart 10–14kW Designation PELLEMATIC Smart Boiler-rated power Boiler-partial load System always runs at rated load Boiler efficiency rated power Boiler temperature Combustion chamber temperature Water area Water capacity Water supply/return - dimensions Water supply diameter Drinking water heat exchanger Solar finned tube heat excahnger Freshwater module – bulk power 25 l/min at min. 60°C Accumulator temp. / 45°C DHW Temp Max. operating pressure Test pressure Fresh water module Solar plate heat exchanger Flue gas area Available supply pressure of blower Flue gas temperature...

Maximum unit dimension Tilt hight Weights Weight packed on the pallet with wooden frame Weight without water, fully equipped, not packed Gross weight without additions, not packed Volume hopper Electrical Components Connection value - Suction system Main Drive Drive Motor Suction Turbine Electrical Ignition Cleaning Motor Mantle - Glass wool – lambda value 0,035 W/mK Pellets made of 100% natural wood according to EN 14961–2, class A1 Colorific value Bulk density Water content Thermal insulation Dust rated power Dust rated power Emissions acc. to test reports O2-contents rated power Technical...

Dust rated power WB Federal Institute of Agricultural Engineering Wieselburg 1) The resistance in the flue system at the connection SMART must be 5 Pascal, if the connection pipe and the transition to the chimney are executed pressure tense. Intermediate sizes according to ÖNORM EN303-5 — 5.1.3 - values are averaged BLT-protocol number: 001/13 PE Smart 10,0–14,0 kW — Date of issue: 29.05.2012 BLT-protocol number: 024/10 PE Smart 8 Date of issue: 13.07.2012 BLT-protocol number: 023/12 PE Smart 16 Date of issue: 29.05.2012

Handling and installation Handling options • Crane — The necessary belt is supplied as standard. • Pallet truck • Mount wheels — included in scope of supply, can be mounted very easily on site; see illustration on the right Boiler weight PELLEMATIC Smart fully equipped, unpacked, without water; all sizes Gross weight without attachments, unpacked If it is not possible to transport the Pellematic Smart with a width of 1160 mm to the installation location vertically at ground level, you must dismantle certain components, depending on the door width. This reduces the transport dimensions and weight...

Necessary minimum clearances For proper, cost-effective operation and maintenance of the heating system, the minimum distances to the surrounding components must be observed during installation of the boiler. Also observe the minimum distances to the flue gas pipe required by local regulations. Min. distance from flue gas pipe connection to wall or component Min. distance from boiler side to wall or component Min. distance from boiler front to wall or component Min. distance from burner side to wall or component Also observe the local statutory regulations!