Technical Specifications:
The Pellematic Condens boilers are available in models ranging from 10 to 18 kW. They have a high energy efficiency class of A++ and a seasonal space heating energy efficiency of 93-94%. The boilers operate in both condensing and standard heating modes, with efficiencies reaching up to 99.5% in condensing mode.

Water and Flue Gas Specifications:
The water capacity is 72 liters, with a flow/return connection of 1 inch. The boilers have a maximum operating pressure of 3 Bar and a test pressure of 4.6 Bar. Flue gas temperatures vary between 38-90°C depending on the mode and load, with a flue gas tube diameter of 132 mm.

Fuel and Combustion:
The boilers use pellets made of 100% natural wood, conforming to EN ISO 17225–2, class A1. The calorific value is approximately 16.5 MJ/kg.

Dimensions and Installation:
The boiler dimensions are consistent across models, with a depth of 724 mm, height of 1408 mm, and width of 732 mm. Minimum clearance dimensions are specified for proper installation, including a minimum ceiling height of 1850 mm.

Electrical Components:
The boilers require a 230 VAC, 50Hz, 16A connection. Various components such as the main drive, standby power, and flue gas fan have specific power requirements.

Installation Notes:
Ensure door widths are sufficient for installation, with a minimum of 660 mm required. Clearance dimensions must be observed to comply with local legislation.

Contact Information:
ÖkoFEN Forschungs- & EntwicklungsgesmbH, A-4133 Niederkappel, Gewerbepark 1. Tel.: +43 (0) 72 86 / 74 50, Email: [email protected]