PORTAL PRO ® and OAKWORKS® massage chair OWNER’S MANUAL 360º Access 350 lb. weight rating Toll Free: 800.558.8850 Phone: 717.235.6807 www.oakworks.com R

SETTING UP YOUR MASSAGE CHAIR 1. Lean your chair forward and lift the back of the seat until fully open. Caution: make sure the cable is fully extended before sitting on the chair. 2. Remove the plastic covering from the wheels and feet. FACE REST SET UP Preliminary Face Rest Adjustments for Convenient Cam Lock Orientation • Note: If the face rest cam locks are on the side of your strongest hand, there is no need to make the adjustments 1-5 below. 1. Loosen the face rest cam locks and knobs. 2. Remove the face rest pad from chair. 3. Turn the face rest platform so that the cam locks are on the...

FACE REST ADJUSTMENTS FOR OPTIMAL CLIENT COMFORT Cam Locks Oakworks QuickLock™ Face Rest has virtually unlimited positioning. • Note: The face rest can be moved up and down after loosening the knobs and angled after releasing the cam locks. Knobs Fig. 3 1. Show your client how to get on the chair. 2. Release the cam locks and knobs on the face rest. (Fig.3) 3. Ask your client to sit down and hold onto the face rest on the Velcro® on the sides of the “U” tube. (Fig.4) 4. Tell your client to pull the face rest toward his/her forehead until it rests comfortably on the pad. 5. Have your client lean...

FOLDING AND CARRYING YOUR MASSAGE CHAIR 1. 2. 3. 4. 5. 6. Fig. 8 Fig. 9 Release the arm-rest cam lock and the strap to fold the arm rest. Lock the cam. Fold down the face rest and relock the cam locks and tighten the knobs (Fig 8). the push button on the seat tube into the third hole from the bottom. Put Lean the chair forward and push in the seat. The chair will fold (Fig.9). Push on the seat to lock it in the folded position. The massage chair has wheels, so you can pull it along smooth surfaces by holding onto the face rest. Use the spacer bar on the face rest as a handle for pulling your...