INSTRUCTION MANUAL with US & imported parts

© Copyright 2012 Oakworks® , Inc. Notice Printed in U.S.A. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without prior written consent of Oakworks®, Inc. Oakworks® is a registered trademark of Oakworks®, Inc. The information contained in this document is subject to change without notice and should not be construed as a commitment by Oakworks®, Inc. Oakworks®, Inc. assumes no responsibility for any errors that may appear in this document nor does it make expressed or implied warranty of any kind with regard to this material,...

symbol identification Symbol identification warnings Symbol Identification This symbol, when used in this manual and on product labels, represents a caution. Be sure to read and comply with all precautions and warnings. This symbol, when used in documentation on this product, indicates danger and warns against an electrical shock hazard. Be sure to observe and comply with all warnings and instructions. This symbol, when used in documentation on this product, indicates a Protective Earth (Ground) Terminal. This symbol when used in documentation on this product, warns that during transport there...

Read and Save These Instructions warnings / safety Warnings & safety instructions warnings & safety instructions Improper use of this device can cause injury. Be sure to read all operating instructions prior to use to prevent injury to operator or client. Danger warning Electrical Shock Hazard. To reduce the risk of electric shock, always disconnect the table from the electrical outlet before moving the table or doing any maintenance or troubleshooting procedures. Never use this equipment if it has a damaged cord or plug. Use this equipment only for its intended use as described in these instructions....

Warnings & safety instructions warnings / safety Read and Save These Instructions warning warnings warnings & safety instructions This product is equipped with an interior accessory outlet. The total electrical load of equipment plugged into this set of outlets is not to exceed 840 watts. Close supervision is necessary when this furnishing is used by, or near, children, invalids or disabled persons. Do not leave children alone or allow them to operate the controls. Keep controls out of reach of children. Do not allow children to crawl under the table. caution Be certain that the table is completely...

Warnings & safety instructions (continued) GROUNDING INSTRUCTIONS caution warnings & safety instructions GROUNDING Read and Save These Instructions To remove the accessories from the shelf: Turn the accessory controls to the off position and then disconnect the unit from the interior power source by removing the plug from the outlet. When moving the table: Turn the accessory controls to their off position, disconnect the table from the exterior power source by removing the table plug from the outlet. IMPORTANT Grounding Instructions caution Read and Save These Instructions GROUNDING INSTRUCTIONS...

product description PRODUCT DESCRIPTION product description Universal Table Extender (optional accessory) Self Adjusting Removable Arm Rests (2) (optional) Powder Coated Steel Base Hydraulic Lift Columns (4) Accessory outlets (2) Foot Control (1) Storage shelf Table Specifications • Height Range: 25” - 35” (64-89 cm) • Width: 29” or 31” (74 cm or 79 cm) • Length: 72” (183 cm) • Lift Capacity: 500 lbs. (227 kg.) • Weight: 232 lbs. (105 kg.) • Shipping Weight: 320 lbs. (145 kg.) • Top: Electronically Controlled Flex Top • Base: Metal Frame Base with shelf and electric height adjustment • Electronics:...

installation When operating the table’s controls be sure to observe all cautions and warnings given in the manual to prevent injury to both operator and client. assembly & installation installation installation installation The table comes completely assembled and ready to use. Plug the cord into a functioning outlet that is rated for the table. Arrange the power cord and foot switch so that they will not create a tripping hazard. Place the controls in a safe location where they are convenient and accessible. Keep the controls out of the way of all table mechanisms. leveling instructions If Table...

directions for use directions for use Directions for Use Daily Cycling caution When operating the controls and making any and all adjustments to the table, move hands and feet away from the working mechanism of the table. Children must be supervised when around this equipment by a responsible adult. Do not leave children alone or allow them to operate the controls. Do not allow children to crawl under the table. 8 The Oakworks® Leo™ uses hydraulics and hydraulic fluids to adjust the table height. Maintaining the quiet operation of your table requires that you fully cycle your table (up & down)...

directions for use Directions for use Adjusting the height and top When operating the table’s controls be sure to observe all cautions and warnings given in the manual to prevent injury to both operator and client. Press and hold the appropriate button until the position desired is achieved and then release. The arm rests will adjust automatically to provide the most in comfort and ergonomics while staying parallel to the floor, no matter what the position. caution DO NOT sit on the elevated backrest or leg rest. Children must be supervised when around this equipment by a responsible adult. Do...

directions for use directions for use Read and Save These Instructions caution important safety note The cabinet hood area under the backrest top is not designed for storage or as an area to hold accessories while with a client. DO NOT use this area for holding anything. Damage can occur to the table, especially when commands that are accessed by the foot control are activated. Placing anything on this area will prohibit movement of the backrest and can cause damage to the table or the object and will void the warranty. Not for Storage! Do not store or place anything on the cabinet hood under...