USER MANUAL Celesta and Clodagh Gemini ® Clodagh Gemini made in the USA with US & imported parts

Notice The information contained within this document is subject to change without notice and should not be construed as a commitment by OAKWORKS®, Inc. Printed in U.S.A. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without prior written consent of OAKWORKS®, Inc. OAKWORKS® is a registered trademark of OAKWORKS®, Inc. OAKWORKS®, Inc. encourages requests for technical specifications and the like documentation to ensure accuracy. The appropriate documentation is available upon request. OAKWORKS®, Inc. shall not be liable for...

PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS PRODUCT USE DESCRIPTION The product is a cord connected spa/massage table for commercial use. It is intended for indoor use. Maximum weight capacity of 500 lbs. The product is intended to be used by trained professionals in a controlled environment. A review of the following Safety Instructions is important for the safety of the operator and patient. Read all instructions and understand this entire user manual before using the product. There are no known contraindications to the use of this equipment. The table should not be used in any...

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using an electrical furnishing, basic precautions should always be followed, including the following: READ AND SAVE THESE INSTRUCTIONS To reduce risk of electric shock: 1. Always unplug this furnishing from the electrical outlet before cleaning. 2. Connect this furnishing to a properly grounded outlet only. See Grounding Instructions in this manual. Electrical Shock Hazard. The power supply/control module is located on the lift frame. No user serviceable parts are inside. Refer servicing to qualified personnel. Unplug wall plug...

IMPORTANT SAFETY INSTRUCTIONS The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in increased emissions or decreased immunity of the table. The table should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary, the table should be observed to verify normal operation in the configuration in which it will be used. The table is designed to be a stand-alone table. This table must not be modified or incorporated into any other equipment. Proper operation of this equipment is very important for...

PRODUCT DESCRIPTION Celesta Self Adjusting Removable Arm Rests (2) (option) Universal Table Extender (optional accessory) Fully Enclosed Cabinet Base Cabinet doors (access both sides) Vertical Electronic Lift Columns (4) TABLE SPECIFICATIONS Height Width Lift Capacity 500 lbs. (227 kg) Maximum Working Load Electric Salon Top or Flat Top Electronics Flat Top model shown here Wood/Baltic Birch For electrical specs, see Specifications

PRODUCT DESCRIPTION Table Extender (optional accessory) Self Adjusting /Removable Arm Rests (2) (option) Vertical Electronic Lift Columns (4) Exterior Cabinet shelf; foot end only (1) Flat Top model shown here with QuickLock™ Face Rest and Boiance Crescent For electrical specs, see Specifications section.

INSTALLATION The tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated for the table. (see Grounding below) Arrange the power cord and control cords so that they will not create a tripping hazard. Be sure access to the plug is not blocked for disconnecting the table from power. Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only. Grounding for 120 Volt products: This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug shown below. See Grounding Methods - US 120V Example....

INSTALLATION IN CABINET OUTLET This product is equipped with an interior 120-volt 60Hz accessory outlet. The total electrical load of equipment plugged into this set of outlets is not to exceed 7 amps or 840 watts. Voltage will be different for other counties. This product offers an in-cabinet plug to accommodate hot towel cabinets or other accessories. This allows you to store the unit inside with no excess cords to get in the way. With it plugged in, your towels stay warm and within easy reach, yet are still out of the way. You will find the plug inside the cabinet at the head end of the table....

DIRECTIONS FOR USE TABLE KEYSWITCH A table keyswitch is located inside the cabinet on the shelf at the head end of the table. This key switch will lock-out the table and prevent all motions. It should be used to prevent unauthorized use. Remove the key if children have the opportunity to access the table without adult supervision. FOOT CONTROL OPERATIONS FLAT TOP TABLES ONLY When using the table Height Up function, do not place anything between the metal frame and the base structure as damage can occur to the table. The Flat Top Tables offer height positioning with electronic ease. Operate the...

DIRECTIONS FOR USE FOOT CONTROL OPERATIONS ELECTRIC SALON TOP TABLES ONLY Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed for storage. DO NOT use this area for holding anything as damage can occur to the table. The Electric Salon Top Tables offer backrest, height and footrest positioning with electronic ease. Operate the foot control as shown below to raise or lower the backrest, height or footrest functions of the table. Backrest Down Footrest Down Height Down

DIRECTIONS FOR USE FOOT CONTROL OPERATIONS ADJUSTABLE BODY COMFORT (ABC) SYSTEMS ONLY ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the ABC System. Only use the ABC System as intended. For safety of your client, use a cloth sheet between the ABC System and your client. The OAKWORKS® Adjustable Body Comfort (ABC) System is designed to lower the pressure on breasts and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine. The height of the cushion is easily adjusted up and down in small increments by using the foot...