Squareparker N7000 Fully automatic parking for up to 4 parking levels in multi-row arrangement next or behind each others – without ramps or driveways

1st case example The NUSSBAUM Squareparker N7000 is used for automatic parking of vehicles – without ramps and driveways. On one or several parking levels pallets are arranged (in-ground or above ground) next or behind each others (also in multi-row arrangement). A conveyor system in the parking level moves the pallets to a vertical lift. This vertical lift transports the vehicles with pallets to a transfer area at entrance level. In the transfer area the vehicles are parked and retrieved by the users. The automatic parking system offers protection against vandalism and theft, and is environmentally...

2nd case example The example below shows 48 parking spaces on three parking level in three rows. The height of the transfer area is dependent on the gate height. Please contact us! * Space requirement for the building pillars according space between the building pillars and the pallets = 10 cm. The top-view left shows a possible arrangement of building pillars. to the static is not considererd in this planning. Needed The top view left side is based on a pallet width of 230 cm and a pallet length of 520 cm (other dimensions are available, see table pallet dimensions). 10 Vertical lift 1435 Total...

General planning notes Transfer area Vertical lift Platform capacity In the case examples the vertical lift is shown in the middle of the parking system to optimize the access times. However, the lift can be located in any place. Please contact us! The vertical lift has a intelligent Installation dimensions device to collect the pallets and forms in extended We offer customized solutions for your individual position the surface of the transfer area. application. Please contact us! Position of the transfer area Empty spaces In the case examples the transfer area is located If the pallets are arranged...