PARKING PALLET N6301
4Pages

PARKING PALLET N6301 Maximum space utilization in driving lanes, behind columns and in corners

Transverse sliding platform to optimize oor space Increase of available parking space / maximum space utilization The transverse sliding pallet is to be used for independent parking of vehicles in rows behind each other, indoor (not suitable for outdoor-installation) by permanent users. Transverse sliding platforms can maximize space utilization in driving lanes, behind columns and in corners. The pallets run on rails, normally with one empty space per row to provide the manoeuvring area to reach the parking spaces behind this row. Area of application Residential buildings, ofce buildings,...

case study - transverse sliding process in running direction Case study 1: g. above: operating panel with dead man´s control (freely programmable execution) User note: No persons are allowed to be on the platform in the surrounding hazard area of the platforms during the operation. The pallet can only be trodden for parking the vehicles in and out. The platforms can be driven on forwardly and backwardly.

Technical information Top view Technical data Inside width Outer width Dimensions All dimensions are in mm. The dimensions are minimum dimensions. Tolerances to DIN 18202 table 3 (levelness of the oor), DIN 18330, DIN 18331 are added to consider. Limitation of the scope of supply lockable main switch to VDE 0113 T1, in a height of 1,70 - 1,90 m assembled, direct accessible in the front Safety notes According to DIN 14010 safety distance must be provided as follows: Innenbreite Außenbreite 30 cm between the bumpers of cars being parked on the parking platforms and xed parts of the...