Product Code Construction

The product code is constructed by combining the following elements: code + left/right orientation + glass type + profile type, resulting in the complete product code.

Key dimensions include 27 mm and 13.5 mm for profile measurements.

Order Instructions

It is critical to specify in the order whether the shower tray is raised or flush with the floor.

Product Description

ROSE 2.† PH+FH is a shower enclosure with 2 leaves: 1 sliding door + 1 fixed door + a fixed lateral panel without angular profile.

Available orientations: Left (S / Esquerda) and Right (D / Direita).

Product Features

• Non-reversible installation
• Optimal water tightness

Measurements and Codes

Measurements are provided for door widths ranging approximately from 117 cm to 180 cm, with corresponding codes (e.g., ROSEPH117 D-S- for 117-120 cm width).

Measurements include extensibility for installation between walls and for trays flush with the floor.

Glass Selection

• Tempered glass 6 mm thickness (compliant with European standard UNE EN 14428)
• Available finishes: Transparent, Satin (Frosted), Serigraphy Rose 1, Serigraphy Rose 2

Profile Selection and Colors

• Profiles available in White (Branco), Silver (Abrillantado), and Chrome (Cromo)
• Profile codes are provided for different profile types and colors

Fixed Lateral Panel Options

• Fixed lateral panel without angular profile, reversible and non-reversible versions
• Serigraphy (decorative screen printing) available on non-reversible panels
• Panel sizes range from 68 cm to 121 cm with corresponding codes

Optional Accessories

• Magnetic profile closure kit for versions installed between walls
• Optional glass or chrome handles with hole distance of 256 mm

Installation and Measurement Guidelines

• Measure from wall to the external edge of the shower tray
• Take three measurements between walls (bottom, middle, top) and use the smallest measurement for ordering

Technical Data and Codes

Various product and accessory codes are listed for ordering, including magnetic closure kits and handles.

Important Notes

Always specify the tray elevation in the order to ensure correct product configuration.