INTERIORS & EXTERIORS NOVAWOOD DECKING SOLUTIONS - CLIPS SYSTEM

nova wood INTERIORS & EXTERIORS N0VAW00D DECK SOLUTIONS -CLIPS SYSTEM novathermowood deckings are 100% natural solid materials having their own unique features, including no chemicals with proved quality for all weather conditions. These materials should be applied and maintained properly in order to achieve a long product lifespan. Application solutions offered by our company are listed below. Application surface; I • Application ground should be dry and rigid • The ground surface should be even and gauged • The surface should have an appropriate slope to avoid water accumulation on the surface...

NOVAWOOD DECK SOLUTIONS -CLIPS SYSTEM • Underconstruction should be installed so as to avoid contact with soil. • The correct deck application starts with the selection of the right underconstruction. Therefore, deck and underconstruction of the products having the same humidity value will ensure that bending/swelling principles of the materials are at the same level . water flow • Underconstructions should be installed in parallel to water flow direction. • In case a construction material (aluminum, steel, galvanized iron etc.) other than wood is used, it is recommended to use a wood carcassing...

NOVAWOOD DECK SOLUTIONS -CLIPS SYSTEM • In case the ground is water insulated, the underconstruction should be fixed to the ground with epox- • Underconstructions should be installed at the following intervals in order to prevent the decks from bending and brak- - Improves the resistance of checkings formed on the surface. - Delays color fading caused by UV lights. - Prevents stains formed due to spilling of liquids (coke, tea etc.) on the surface. - Oiling the head joists of the deckings prevent head splits that may occur in time. - Prevents stains on the surface caused by raindrops. • It is...

NOVAWOOD DECK SOLUTIONS -CLIPS SYSTEM • The minimum space between deckings should be minimum 5 mm. With Novawood clips, this space is provided automati- • In case wood parts merge with walls or other surfaces, 1,5 cm space should be left on the head parts, and on the edges as • It is recommended to leave 3mm space where head parts of the decks come upon the underconstruction. • In case Novawood head joist application is performed instead of leaving space on the head parts of the decks, it is recom- mended that decks should be 2 cm longer than underconstruc- tions in order to keep head parts of...

NOVAWOOD DECK SOLUTIONS -CLIPS SYSTEM mi • It is recommended that the underconstruction and deckings 1 are glued together at their merging point in order to prevent. • Second or third layer of oil should be applied to the surface of the wood following the completion of deck application. Technical specifications provided by producer or distributor should be taken into consid- eration when applying preservatives. • The screws to be used in deck application should be stainless steel. • In applications without clipsing, high torsion screws can be preferred to prevent pre-drilling Otherwise, pre-drilling...