GROVE PRIMER

GROVE PRIMER

GROVE PRIMER

Product catalog summary
Description: GROVE PRIMER is a liquid adhesive composed of high molecular weight elastomeric polymers. It enhances the adhesion properties of cementitious systems on challenging surfaces.
Where to Use: This primer is designed for GROVE series mortars, GROVE MASSETTO, and SC 1 and SC 1-R screeds. It can also be used with any cement-based product.
Application:
  • Surface Preparation: Clean surfaces to remove dust and foreign substances. Tiled surfaces should be washed with NORDECAL FORTE and rinsed.
  • Mixture Preparation: Mix 3 parts cementitious product with 1 part GROVE PRIMER. The cementitious part can be replaced with GROVE MASSETTO or similar pre-mixed products.
  • Operating Procedure: Mix GROVE PRIMER with the powdered product, adjust fluidity with water or more primer, apply evenly, and overcoat within 30 minutes.
Coverage: Approximately 0.3 liters per square meter.
Specifications:
  • Bulk mass: 1.02 ± 0.05 g/cm3
  • pH: 8.2 ± 0.1
  • Minimum film formation temperature: +1°C
  • Application temperature: +5°C to +35°C
Packaging and Storage: Available in 1, 5, and 25 kg containers. Store in a dry area at +5°C to +30°C. Frost sensitive.
Legal Notice: Usage tips are based on current knowledge and do not imply responsibility for the final result. Users should verify product suitability through preliminary tests. The latest datasheet revision is available on the website.
See more

Catalog excerpts

GROVE PRIMER-1

cnica - Fiche tecnique - Karta danych technicznych NORDGROVE® PRIMERLiquid adhesive for GROVE systems and screeds Description GROVE PRIMER is a watery additive consisting of high molecular weight elastomeric polymers that, once added to cementitious systems, considerably increase their gripping properties on "difficult" surfaces. Where to use GROVE PRIMER is an adhesive specifically designed for all mortars belonging to the GROVE series, GROVE MASSETTO and both SC 1 and SC 1-R ready screeds. Moreover, it can be used as an adhesive latex for any cement-based product. Application Surface preparation GROVE PRIMER treatment must be preceded by a quick cleaning of the surface to remove dust and all foreign substances; tiled surfaces should be washed with NORDECAL FORTE (or NORDECAL FORTE GEL) and rinsed. Mixture preparation To prepare an effective slurry, the usual formulation is the following: • 3 parts by weight of cementitious product • 1 part by weight of GROVE PRIMER. Where the cementitious part consists of 1 part cement and 2-3 parts sand; in order to make operations easier, the cementitious part can be substituted by GROVE MASSETTO or any other pre-mixed product like, for instance, SC 1 or SC 1-F. Operating procedure • pour in a mixing container GROVE PRIMER in a quantity equal to approx. 25-30% by weight (depending on the required grout type) of the product to be added; • then add the powdered product (the remaining 70-75% by weight) while under agitation; • stir until a fluid grouting is obtained adjusting fluidity by the addition of water or GROVE PRIMER; • pour onto the surface and brush or paint the product in order to distribute it evenly; • once the slurry is applied, proceed with overcoating with the subsequent product's layer within half an hour. Coverage The average coverage is 0.3 liters per square meter. Legal notice Tips on how to use our products match the current state of our knowledge and do not imply any assumption of responsibility or/and liability for the final result of works. Therefore, customers are not NORD RESINE SPA - Via Fornace Vecchia 79 - 31058 Susegana (TV) - Italy - www.nordresine.com Page 1/2

 Open the catalog to page 1
GROVE PRIMER-2

Technical data sheet - Scheda tecnica - Fiche tecnique - Karta danych technicznych SCREEDS AND SELF-LEVELLING COMPOUNDS MASSETTI E AUTOLIVELLANTI CHAPES JASTRYCHY I WYLEWKI SAMOPOZIOMUJĄCE GROVE® PRIMER Liquid adhesive for GROVE systems and screeds exempt from the responsibility to verify the suitability of products for use and final aims through preliminary tests. The website www.nordresine.com contains the latest revision of this datasheet. Edition 18.04.2011 NORD RESINE SPA - Via Fornace Vecchia 79 - 31058 Susegana (TV) - Italy – www.nordresine.com Page 2/

 Open the catalog to page 2

All NORD RESINE catalogs and technical brochures

  1. BETON CR

    3  Pages

  2. CEM-O-LUX

    7  Pages

  3. DRY CONCRETE

    2  Pages

  4. CEM-OX

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.