CEM-O-LUX
7Pages

Technical data sheet - Scheda tecnica - Fiche tecnique - Karta danych technicznych RESIN FLOORS PAVIMENTI IN RESINA SOLS EN RÉSINE POSADZKI ŻYWICZNE - DEKORACYJNE I PRZEMYSŁOWE CEM-O-LUX One component coloured enamel Description CEM-O-LUX is a coloured enamel consisting of non-yellowing thermoplastic resins dissolved in solvent and should be applied in two coats, PRIMER and FINISH. When applied on cement surfaces, CEM-O-LUX forms a coloured decorative coating with the following features: • matt or semi-gloss; • high surface hardness; • firm bonding to the substrate; • water-repellent and resistant to oils and tyre marks; • applicable both indoors and outdoors. CEM-O-LUX acts as impregnating and reinforcing agent for porous cement surfaces and as coloured dust seal. CEM-O-LUX protects the cement surface against damaging factors, such as: • carbonation, by hindering diffusion of the carbon dioxide in the solid matrix; • scouring action of the rain; • corrosion, by limiting the penetration of degrading substances (chlorides and sulphates); • staining and adhesion of dirt in particular from grease, oils and tyres; • wear and abrasion. Given the high speed of curing, the treatment with CEM-O-LUX is already rain resistant only 12 hours after application (at +30°C). Standard colouring The product is available in the following colours: • GRIGIO FINESTRA (WINDOW GREY) • VERDE OSSIDO (OXIDE GREEN) • ROSSO OSSIDO (OXIDE RED) • TABACCO (TOBACCO) Coverage The 2.5 kg kit (PRIMER + FINISH) is sufficient to cover a surface area of approx. 8 m2. Where to Use CEM-O-LUX is used for the mark-proof and wearproof protective treatment of indoor and outdoor cement flooring. It is particularly recommended for: • garages; • storerooms; • ceilings; • cement pavements; • low walls and kerbs in cement; • private car parking areas. Preparation of the substrate (A) New flooring in industrial cement Remove the dust in the normal manner and apply CEM-O-LUX PRIMER. • In particular cases a fine, more or less yellowed, detached film appears on the surface of concrete finished with quartz (industrial floor): this means that the floor has been (correctly) cured under a concrete-curing film applied wet-on-wet during laying. This film must be removed by scraping and/or sanding and washing with STRIPPER diluted 1:5 by volume with water, before applying CEM-O-LUX. • Roughen the surface with an acid wash using NORDECAL FORTE GEL, rinse and fully remove the washing liquid, taking care that no pools of liquid remain in the area to be treated. Apply CEM-O- NORD RESINE SPA - Via Fornace Vecchia 79 - 31058 Susega

Technical data sheet - Scheda tecnica - Fiche tecnique - Karta danych technicznych RESIN FLOORS PAVIMENTI IN RESINA SOLS EN RÉSINE POSADZKI ŻYWICZNE - DEKORACYJNE I PRZEMYSŁOWE CEM-O-LUX One component coloured enamel LUX PRIMER the next day. If the removal of the curing compound and subsequent wash are carried out using a high-pressure water jet machine rather than sanding or an acid wash, wait at least one week (or in any case the time necessary for the surface to return to a uniform dry colour) before applying CEM-O-LUX PRIMER. Cracks and joints (on new or old floors) • To seal a crack or...

ecnica - Fiche tecnique - Karta danych technicznych (ID RESIN FLOORS dD PAVIMENTI IN RESINA dD SOLS EN RESINE (PL) POSADZKI ZYWICZNE - DEKORACYJNE I PRZEMYSLOWE ecnica - Fiche tecnique - Karta danych technicznych CEM-O-LUXOne component coloured enamel Carry out an acid wash with NORDECAL FORTE GEL, rinse and fully remove the washing liquid, taking care that no pools of liquid remain in the area to be treated. Wait one day before proceeding with work. ■ Alternatively, clean thoroughly using a high-pressure water jet machine and wait at least one week (or in any case the time necessary for...

ecnica - Fiche tecnique - Karta danych technicznych (ID RESIN FLOORS dD PAVIMENTI IN RESINA dD SOLS EN RESINE (PL) POSADZKI ZYWICZNE - DEKORACYJNE I PRZEMYSLOWE ecnica - Fiche tecnique - Karta danych technicznych CEM-O-LUXOne component coloured enamel temperature [°C] The minimum time for the transit of vehicles (wheeled traffic) over CEM-O-LUX varies with the The time given above for the transit of vehicles (wheeled traffic) over CEM WAX obviously implies that the NORD RESINE SPA - Via Fornace Vecchia 79 - 31058 Susegana (TV) - Italy - www.nordresine.com Page 4/7

dD RESIN FLOORS dD PAVIMENTI IN RESINA dD SOLS EN RESINE (PL) POSADZKI ZYWICZNE - DEKORACYJNE I PRZEMYSLOWE CEM-O-LUX is already resistant to wheeled traffic. (4) Maintenance Routine cleaning of CEM-O-LUX • Surfaces treated with CEM-O-LUX (and with CEM WAX) are cleaned using CEM CLEANER diluted 1:5 by volume in water (1 litre product in 5 litres water) and mop, multi-purpose cloth, industrial floor washer (also a washer-drier) or single-brush equipment with white Scotch Brite® disk. • Rinse with water (lukewarm if possible). Renewing the wax: After routine cleaning the wax layer can be...

ecnica - Fiche tecnique - Karta danych technicznych (ID RESIN FLOORS dD PAVIMENTI IN RESINA dD SOLS EN RESINE (PL) POSADZKI ZYWICZNE - DEKORACYJNE I PRZEMYSLOWE ecnica - Fiche tecnique - Karta danych technicznych CEM-O-LUXOne component coloured enamel minimum time for walking on (50±10% r.h.) NORD RESINE SPA - Via Fornace Vecchia 79 - 31058 Susegana (TV) - Italy - www.nordresine.com Page 6/7

ecnica - Fiche tecnique - Karta danych technicznych (ID RESIN FLOORS dD PAVIMENTI IN RESINA dD SOLS EN RESINE (PL) POSADZKI ZYWICZNE - DEKORACYJNE I PRZEMYSLOWE ecnica - Fiche tecnique - Karta danych technicznych CEM-O-LUXOne component coloured enamel alcohols *method according to UNI EN ISO 2812-1:1996 - Method 2 (continuous contact with absorbent medium). Legal notice Tips on how to use our products match the current state of our knowledge and do not imply any assumption of responsibility or/and liability for the final result of works. Therefore, customers are not exempt from the...