The High Sunchair is an evolution of the Low chair, a complementary low-slung seat for relaxing outdoors. The difference between the two seats is that the Sunchair is more similar to a deck chair, evoking warm-weather resorts, swimming pool terraces or lush green courtyards. Sunchairs can be placed in groups for conversation or to create spaces for socialising in parks, gardens or urban spaces. Produkt listed i jO, BYGGUARU jfe' O____jg _ fl.. _ Svanens Husportal VHx BEDOMIIINGEN OtlllQflflllS Nola® • High Sunchair • Page 1 / 6

Length: 167 cm Width: 61.4 cm Height: 111 cm Sitting height: 35 cm Weight 57,3 kg Product numbers and combinations High Sunchair Additional fee for choice of non-standard wood Additional fee for choice of non-standard colour Append to product number WOOD AND FINISH E for oiled oak. LIN for linax impregnated pine. METAL SURFACE FINISH C for any color of steel, at an additional cost. Choose a RAL colour. INSTALLATION TYPE N for surface mount. Standard colours Metal: RAL 3005 RAL 6015 RAL 9005 RAL 9010 Gris 2150 Sablé Wood: Oiled oak Linax impregnated pine Materials and surface treatments Nola®...

Pine Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces. Oak Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for...

Do not use the mounting plate as a drilling template, as the hole edge may be damaged and corrosion may start. Use hot-dip galvanized or stainless steel fasteners. NOTE! Not electro-galvanized! Make sure there is a distance between the mounting plate and the substrate, thus avoiding capillary action drawing moisture between the foot and the substrate. Use suitable spacer material to secure the distance (at least 3-4 mm), plastic, stainless steel or hot-dip galvanized washers. Protect the hole edge by filling the cavity between the screw and the hole edge with protective grease, or sealant such...

Linax impregnated pine Outdoor furniture requires oiling every 5 years and panel products and roofs require oiling every 12 years. Maintenance should be done with linseed oil varnish. It is important that the wood is clean and dry (max. 20% moisture content) before it is finished with oil. When washing, do not use high-pressure cleaners. Washing should be done with lukewarm water and then rinsed off with a water hose at normal pressure. Strong grease-dissolving agents should not be used, but washing should be done with a mild household detergent. Detergents containing bleach should also not be...

Nola® • High Sunchair • Page 6 /