Legacy Stone- Terrazzo

Product catalog summary

Overview: The document is an architectural masonry product catalog from Nitterhouse Masonry Products, focusing on their Legacy Stone line, particularly the Terrazzo finish. It highlights the product's specifications, applications, and installation guidelines.

Specifications: Legacy Stone in Terrazzo finish is a 4” groundface veneer CMU, meeting ASTM-C129 standards for non-load bearing units. It boasts a compressive strength of 8500 psi and less than 5% absorption. The product is suitable for both at and below grade applications.

Product Features: The Legacy Stone offers a smooth granite appeal, ideal for adding class and drama to both exterior and interior applications. It is available in various colors and sizes, with additional options upon request.

Technical Information: The masonry units conform to ASTM standards, including ASTM-C67 for compressive strength and ASTM-C140 for absorption and density. They are not designed to be load-bearing but comply with ASTM-C129 for non-load bearing units.

Quality Assurance: Legacy Stone units meet ASTM C90 specifications. They are delivered on stretch-wrapped wooden pallets and should be stored properly to avoid damage.

Installation Guidelines: Units should be laid using standard masonry practices, ensuring uniform joints and proper anchoring. Flashing, weep holes, and vents should be installed as per standard practices. Walls should be protected during and after installation to prevent damage.

Cleaning and Maintenance: Walls should be kept clean during installation, and any excess mortar should be removed immediately. A final clean down with water and a brush is recommended. The units require minimal maintenance, but specific cleaning agents may be needed for graffiti or stains.

Sizes and Shapes: The document lists various sizes and shapes of Legacy Stone units, including specific dimensions for blocks and sills.

Catalog excerpts

• Smooth granite appeal • Adding class & drama • Banding stripes • Exterior & interior applications P H O T O Cisat Dorm James Madison University Harrisonburg, VA Color: LS-27

Open the catalog to page 1

LEGACY STONE - TERRAZZO T E R R A Z ZO F I N I S H Nitterhouse’s Legacy Stone in Terrazzo finish is an attractive 4” groundface veneer CMU. Our finishing process on this Legacy Stone allows the beauty of the aggregates to show throughout the unit for a natural appeal. Legacy Stone meets ASTM-C129 standard for non-load bearing concrete masonry units. Our veneer Legacy Stone can be used both at and below grade applications. Legacy Stone is made with the superior strength of 8500 psi and less than 5% absorption. Additional color options are available. Contact your representative for more information....

Open the catalog to page 2

S P E C I F I CAT I O N S V I S I T W W W. N I T T E R H O U S E M A S O N RY.C O M The following are general guidelines only, and must be verified with individual project and manufacturer specifications. For complete specifications and instant access to our NCMA TEK Manual and other helpful information, please visit our website at www.NitterhouseMasonry.com. PA R T 1 - G E N E R A L PRODUCT NAME: Textured Legacy Stone Masonry Units or Terrazzo Legacy Stone Masonry Units. MANUFACTURER: Nitterhouse Masonry Products, LLC (717) 267-4500, P. O. Box 692, 859 Cleveland Avenue, Chambersburg, PA 17201....

Open the catalog to page 3

LEGACY STONE LEGACY STONE LEGACY STONE LEGACY STONE LEGACY STONE LEGACY STONE LEGACY STONE

Open the catalog to page 4

All Nitterhouse catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list