Wireless control
24Pages

Wireless control (according to the Easywave protocol) Quick installation without any drilling or channelling work A wireless switch that can be installed anywhere you want in the twinkling of an eye. The ideal solution for renovations, because there is no need for drilling or channelling work. The dream of every installer... and every customer! A D V A N TA G E S Not sensitive to interference, frequency 868.3 MHz Mounting without cutting and grinding •  no more impossible installation problems •  less labour intensive •  no inconveniences such as dust and rubble Flexibel •  stick, screw or...

S O M E F A M I L I A R S I T U AT I O N S 1 Wireless universal dimmer Room solution for a bedroom The switches at the bed need to be moved because of new furnishings or a wide new bed. You replace them easily with 2 wireless switches (push buttons) which you stick wherever you like. On top of that you can place a universal dimmer with a push button behind the switch at the door. In that way you maintain the current installation completely and allow the lighting in the room to be dimmed from all control points. 2 Wireless switches Room solution for a kitchen Small and extensive renovations...

WIRELESS CONTROLS Double wireless push button The double wireless push button (or wall transmitter) controls a maximum of two circuits independently (depending on the settings of the receivers) and can be used for one- or two-button functions. The push button can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave. • power supply: battery (supplied) • transmission range: ± 30 m indoor, 100 m in open spaces • mounting: using the screws or adhesive strips supplied • communication protocol: Easywave FINISHING SET WITH TEXT FIELD...

WIRELESS CONTROLS FINISHING SET WITH TEXT FIELD FINISHING SET WITH VENTILATION INDICATION Eight-fold wireless push button The eight-fold wireless push button (or wall transmitter) controls a maximum of eight circuits independently (depending on the settings of the receivers) and can be used for one-, two- or eight-button functions. The push button can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave. • power supply: battery (supplied) • transmission range: ± 30 m indoor, 100 m in open spaces • mounting: using the screws or...

WIRELESS CONTROLS Wireless mini hand-held transmitter with 1 channel and 1 control button This hand-held transmitter has one control button and can be used in combination with all Niko receivers. A function can be assigned to the control button. Visual feedback of the control via an LED. For use in residential environments. Battery supplied. The hand-held transmitter can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave. • transmission range: ± 30 m indoor, 100 m in open spaces • dimensions: 56 x 36 x 16 mm (HxWxD) • weight: ±...

WIRELESS CONTROLS Wireless mini transmitter interface The wireless transmitter interface for push buttons or switches converts the push-button or switching contacts into a wireless telegram: - When connecting up to four push buttons: the wireless telegram is being sent as long as the push button is pressed (max. 10 s). - When connecting up to two switches: the wireless telegram will be sent as soon as the contact is closed. When the contact is opened, a new telegram is sent. Any programming can be assigned when closing or opening the contact. The transmitter interface can also be used in...

WIRELESS FUNCTIONS Modular wireless one-channel receiver 1' The one-channel receiver for DIN rail mounting is provided with one potential-free two-way contact (10 A/230 V) and a connector for the external antenna (05-309). The receiver can only be connected to one phase. The two-way contact cannot be used for safety extra-low voltage (SELV) circuits. The modular dimmers 05-703, 05-704, 05-715 and 05-728 can be controlled. All dimmers have to be supplied at the same phase. • five modes for the on/off function • one- or two-button control • switching time: 0 – 3 s • switch-off delay: 0 s –...

WIRELESS FUNCTIONS Wireless dim receiver 1-10 V, for surface mounting The dim receiver for surface mounting is provided with two channels and a connector for the external antenna (05-309). Each channel consists of an NO contact (4 A/230 V) and a control output 1-10 V (45 mA). Electronic ballasts or dimmers (05-715, 65-410) can be directly controlled with a current signal 1-10 V in accordance with the EN60929 standard. In addition to the conventional dimming from 0 to 100%, it is also possible to activate a preset dimming level or an atmosphere. • nine programming modes • one-, two- or...

WIRELESS FUNCTIONS Wireless receiver for motor control, for flush mounting This mini receiver equipped with a switching contact (4 A/230 Vac) is used to control roll-down shutters or venetian blinds/vertical blinds. The receiver operates both with wall transmitters and hand-held transmitters in a two-button mode for the roll-down shutter functions (open, stop and close) or in a two-button mode for rotating the vertical blinds. The run time is 150 s. Its limited dimensions make it perfectly suitable for flush mounting. • dimensions: 29 x 49 x 70 mm (HxWxL) • weight: 76 g • communication...

WIRELESS FUNCTIONS Wireless one-channel receiver, for flush mounting The wireless receiver with 230 V two-way contact (one channel) is suitable for flush mounting and may only be used as a wireless control in combination with small consumers. With this receiver, small consumers can be switched in three working modes (two modes for the on-off function and pulse mode). You can operate the receiver using either push buttons or hand-held transmitters. • dimensions: 25 x 48 x 48 mm (HxWxD) • frequency: 868.3 MHz • power supply voltage: 230 Vac, 50 Hz • stand-by consumption: ± 0.8 W • output:...