Atmosphere and comfort in all simplicity The right lighting is always important. Our Niko 24V LED strips are a guarantee for top quality colour rendition. The white LED strips always provide the right atmosphere. You can go a step further with RGBW-LED strips. They allow the user to choose the colour or white hue that best matches the event and interiors are made to look their very best. A D V A N TA G E S Wide choice of LED strips • hite w - arm, neutral or cold white. w - trips with 60, 120 or 180 LEDs per metre s • olour c - raditional RGB LED strips t - 6 or 60 LEDs per metre 3 • unable white...

2 RGB(W) control options The wall or smartphone controls are coupled to controllers that can take 24 V-LED strips to 100 W per channel (e.g. 400W-RGBW LED strips). This means that a minimum of 20 metres of adjustable white, RGB or RGBW can be connected to 1 controller. The intensity and colour of the adjustable white RGB- or RGBW LED strips is regulated via the controllers. 1. Wireless wall control (in combination with RF-controller or RF + WiFi controller) • ix buttons with handy and clear icons s - turn on and off - remember tint in the memory - elect a colour s - tart colour loop s - dapt...

LED strip on roll with 60 monochrome LEDs/m With an excellent colour rendition and a light output of 330 to 360 Im/m (depending on the white tone), the LEDs create the optimal mood. The LED strip is sold on a 5 m roll. The LED strip can be cut every 10 cm, allowing installation of the required length. The adhesive tape on the back of the LED strip ensures easy mounting. • dimensions: 2.5 x 8 x 5000 mm (HxWxL) • consumption per meter: 4.8 W • cutting interval: every 10 cm • ambient temperature: -20 - 60°C • protection degree: IP20 • colour rendering index (CRI): > 80 • number of LEDs per meter:...

LED strip on roll with 120 tunable white LEDs/m (60 warm white + 60 cold white LEDs) • dimensions: 2.5 x 8 x 5000 mm (HxWxL) • cutting interval: 5 cm • protection degree: IP20 • number of LEDs per meter: 120 (60 warm white + 60 cold white LEDs) Thanks to the combination of warm white and cold white LEDs on one LED strip, you have all white tones at your disposal and you easily adjust the lighting to the interior or to the desired mood. Furthermore, the LEDs have an excellent colour rendition so that the entire interior is illuminated optimally. The LED strip is sold on a 5 m roll. The LED strip...

Flat aluminium profile Elegant profile made of anodised aluminium, with a length of 2 m. The height of the profile is only 6 mm, allowing it to be discreetly and easily flush or surface mounted. You can place a transparent cover, a milky white cover or a lens cover on this profile. • outside dimensions: 6 x 15.2 x 2000 mm (HxWxL) • utilisable inside width: 11.2 mm • material: anodised aluminium Flat aluminium profile, 2 m Flat milky white cover, 2 m Flat transparent cover, 2 m Transparent lens cover, 2 m 2 galvanised mounting brackets Wide architectural aluminium profile Wide profile made of...

ACCESSORIES FOR LED STRIPS ON ROLL Aluminium profile with adjustable height Elegant profile made of anodised aluminium, with a length of 2 m. The profile is delivered with an aluminium slat which can be slid into the profile in four different ways. You increase or decrease the distance between the LEDs and the surface using this slat, thus changing the angle of reflection. You can place a transparent cover, a milky white cover or a lens cover on this profile. In combination with the lens cover, you change the angle of reflection from 10° (LED strip in the bottommost position in the profile) to...

ACCESSORIES FOR LED STRIPS ON ROLL Wide flat aluminium profile Wide profile made of anodised aluminium, with a length of 2 m. The profile is especially handy for holding wider LED strips or for mounting several LED strips next to one another on the profile. You can place a transparent cover or a milky white cover on this profile. You easily surface mount the profile using the optional spring terminals which fit the rear of the profile perfectly. • outside dimensions: 10 x 26 x 2000 mm (HxWxL) • utilisable inside width: 22 mm • material: anodised aluminium Wide flat aluminium profile, 2 m Wide...

White LED strip with monochrome LEDs The plug-and-play connection system allows a very simple installation. The LED strips are interconnected through the supplied board-toboard connector (340-00306) at the top side of the printed circuit board, without creating any difference in centre distance between the LEDs. This system provides uniform light over the entire light line. The asymmetric shape of the clip makes it impossible to interconnect different LED strips incorrectly. Every LED strip can be subdivided into four parts of 10 cm each. The LED strips are glued at LED connector height to simplify...

LED connector for interconnection in angles and curves Connector for mounting LED strips (340-00001 – 340-00007 and 340-00101) in angles/curves or with interspaces. The length of the wires between the connectors is 14 cm. COMPLETE UNIT LED connector for connection to power supply (board-to-wire) Connector to connect LED strips (340-00001 – 340-00007 and 340-00101) to a power supply. The connector can be mounted on any contact point on the LED strip. This enables you to end up with a continuous light line without creating any difference in centre distance between the LEDs, even where a connection...

POWER SUPPLIES DIN rail power supply for LED strips, 24 Vdc - 25 W The 25 W power supply is suitable for powering LEDs and designed for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals for connecting two charges. Screw terminals are used at primary and secondary side. The output voltage range is adjustable. In conformity with the European directive for EMC and safety EN60950-1. • dimensions (4.5 DIN rail modules): 93 x 78 x 56 mm (HxWxD) • weight: ± 270 g • operating temperature: -20 - 60°C • ambient temperature: 35°C • protection against short-circuit,...