Illuminating ideas.

Atmosphere and comfort in all simplicity We cannot imagine a modern home without atmospheric and orientation lighting. With Niko LED strips and controls, you can create atmosphere and comfort in an energy-efficient manner. A D v a n ta g e s Energy-efficient •  LED strips with a power consumption of only 2.5 W Simple to mount •  plug-and-play, foolproof connection system •  protective profile with double-sided tape and screws •  LED strips can be clicked into the profile (no glue or screws required) Customising •  strips can easily be cut every 10 cm •  angles and curves can be bridged without...

White LED strip with monochrome LEDs The new plug-and-play connection system allows a very simple installation. The LED strips are interconnected through the supplied board-to-board connector (340-00306) at the top side of the printed circuit board, without creating any difference in centre distance between the LEDs. This system provides uniform light over the entire light line. The asymmetric shape of the clip makes it impossible to interconnect different LED strips incorrectly. Every LED strip can be subdivided into four parts of 10 cm each. The LED strips are glued at LED connector height...

White LED strip with RGB LEDs The new plug-and-play connection system allows a very simple installation. The LED strips are interconnected through the supplied board-to-board connector (340-00306) at the top side of the printed circuit board, without creating any difference in centre distance between the LEDs. This system provides uniform light over the entire light line. The asymmetric shape of the clip makes it impossible to interconnect different LED strips incorrectly. Every LED strip can be subdivided into four parts of 10 cm each. The LED strips are glued at LED connector height to simplify...

LED connector for interconnection in angles and curves Connector for mounting LED strips in angles/curves or with interspaces. The length of the wires between the connectors is 14 cm. Complete unit LED connector for connection to power supply (board-to-wire) Connector to connect LED strips to a power supply. The connector can be mounted on any contact point on the LED strip. This enables you to end up with a continuous light line without creating any difference in centre distance between the LEDs, even where a connection to the power supply is made. The length of the wires is 150 cm. Complete...

POWER SUPPLIES DIN rail power supply for LED strips, 24 Vdc - 25 W The 25 W power supply is suitable for powering LEDs and designed for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals for connecting two charges. Screw terminals are used at primary and secondary side. The output voltage range is adjustable. In conformity with the European directive for EMC and safety EN60950-1. • dimensions (4.5 DIN rail modules): 93 x 78 x 56 mm (HxWxD) • weight: ± 270 g • operating temperature: -20 - 60°C • ambient temperature: 35°C • protection against short-circuit,...

POWER SUPPLIES Power supply for LED strips, 24 Vdc - 25 W The 25 W power supply is suitable for powering LEDs. The Niko click system ensures strain relief. The power supply is equipped with two secondary outputs for connecting two charges an two primary inputs for interconnecting (maximum 8x). Screw terminals are used at primary and secondary side. The compact dimensions of the power supply enable easy installation in small spaces. In conformity with the European directive for EMC and safety EN61347-2-13. • dimensions: 116 x 52 x 32 mm (HxWxD) • weight: ± 120 g • maximum 10 Niko LED strips with...

LED dimmer-receiver, 24 Vdc - 25 W The single-channel LED dimmer-receiver will be used to dim LED lighting that operates on 24 Vdc (max. 25 W). The design of the dimmer-receiver makes it easy to conceal (e.g. in a false ceiling). Each control can control an unlimited number of receivers simultaneously. Each receiver can be controlled by up to 16 controls. Only compatible with products with an io-homecontrol® logo. • RF system: io-homecontrol® • frequency: 868 - 870 MHz • transmission range: ± 30 m indoors, 100 m in open spaces • power supply voltage: 230 Vac; 50 Hz • primary connection: 1 x 2.5...

RGB controller, max. 50 W The RGB controller will be used to control Niko LED strips with RGB LEDs, up to a maximum capacity of 50 W (corresponding to 10 Niko LED strips). In addition to the on/off function, there are two modes that can be selected with an NO push button. Press the NO push button briefly for running through the different modes (on, fade, fixed colour, off), and hold it down for adjusting the speed of the ‘fade’ mode or the intensity of the ‘fixed colour’ mode. • power supply voltage: 8 - 24 Vdc • double primary connection: max. 2 x 1.5 mm² or 1 x 2.5 mm² • four-fold secondary...

Orientation lighting with warm white LEDs, 360 lux - 2800 K • works directly on 230 Vac (no transformer needed) • only suitable for a flush-mounting box with a flush-mounting depth of minimum 50 mm • no plaster kit needed • terminal connection: min. 2 x 1.5 mm², max. 2 x 2.5 mm² • power consumption: 0.25 W • light intensity at diffuser: 360 lux • protection degree: IP41 • impact-resistance: IK06 • no heat, IR or UV radiation • average life span of LEDs: 60 000 h Volledig apparaat With plug-in terminals, for screw fixing With plug-in terminals and claws Orientation lighting with backup battery...

Orientation lighting with blue LEDs, 270 lux • works directly on 230 Vac (no transformer needed) • only suitable for a flush-mounting box with a flush-mounting depth of minimum 50 mm • no plaster kit needed • terminal connection: min. 2 x 1.5 mm², max. 2 x 2.5 mm² • power consumption: 0.6 W • light intensity at diffuser: 270 lux • protection degree: IP41 • impact-resistance: IK06 • no heat, IR or UV radiation • average life span of LEDs: 60 000 h Complete unit With plug-in terminals, for screw fixing With plug-in terminals and claws Orientation lighting with red LEDs, 460 lux • works directly...