24 V Detectors
15Pages

Illuminating ideas.

24 V detectors and daylight control modules Saving energy Detectors offer increased comfort and safety. They also help you save a considerable amount of energy. Automatic light control means that dimmers and daylight control are used to adjust lights in order to achieve the ideal level of lighting, depending on the intensity of daylight entering the room. E n d - u s e r a d v a n ta g e s •  ideal lighting in each room •  spect of ergonomics (improved concentration, reduced fatigue, etc.) a •  optimum use of natural light •  reduction of up to 85% in energy consumption when using a...

MOTION DETECTION Motion detector 90°, 24 Vdc, 9 m Motion detector suitable for motion detection in warehouses. To be used in combination with a daylight control module (360-35010, 360-45010, 360-45011 or 360-45012) for lighting control. At a maximum mounting height of 8 m, the detection area covers a surface of 9 x 1 m (LxW). For outdoor applications, use the IP54 protection cap (390-20010). This protection cap needs to be ordered separately. • power supply voltage: 24 Vdc ± 10% • output contact: on/off (NPN transistor) • power consumption: < 5 mA • detection angle: 90° • detection range:...

MOTION DETECTION Presence detector 360° (24 Vdc), for flush mounting in ceilings The motion detector for flush mounting in the ceiling is suitable for switching indoor lighting on and off. To be used in combination with a daylight control module (360-35010, 360-45010, 360-45011 or 360-45012). Possibility of connection to Niko Home Control via the digital potential-free sensor module (550-00210). In conformity with the European directive, EN60669-2-1, for EMC and safety. • power supply voltage: 24 Vdc ± 10% • output contact: on/off (NPN transistor) • power consumption: < 5 mA • detection...

MOTION DETECTION Daylight control module with combination of light, movement and time Energy-saving thanks to an optimum use of lighting. Modular lighting control to be used in combination with a photo cell and motion detector(s). Automatically switching on depending on the measured daylight level and motion detection. Automatically switching off in case of sufficient daylight or after a switch-off delay. Optional control via an NO push button. Suitable for indoor and outdoor applications. In compliance with the European directives for EMC and safety EN60669-2-1. • power supply voltage: 230...

PHOTO CELLS Photo cell for outdoor applications (IP54). To be used in combination with the twilight switch (350-15010). The photo cell has a fixed light • power supply voltage: 56 Vdc ± 10% • protection degree: IP5-4 • output signal: 0 - 10 V • ambient temperature: -40 - 50°C COMPLETE UNIT 350-10010 Pieces: 10 Complete unit Photo cell, IP20, adjustable light sensitivity Photo cell for indoor applications (IP20). To be used in combination with daylight control modules (360-35010, 360-45010 or 360-4501 I). The photo cell has a variable light sensitivity between 3 and 300 lux, 30 and 3 Klux,...

PHOTO CELLS Twilight switch with time block, set of module and photo cell Modular twilight switch with time block, suitable for switching outdoor lighting. Light sensitivity adjustable between 3 and 300 lux. Consists of a photo cell (350-10012) for outdoor applications (IP54) and a module (350-15011). Complete unit Complete unit Twilight switch, only module Modular twilight switch suitable for switching outdoor lighting. To be used in combination with a photo cell (350-10010). Light sensitivity adjustable from 3 to 300 lux. In compliance with the European directives for EMC and safety...

DAYLIGHT CONTROL Daylight control module, on/off Energy-saving thanks to an optimum use of lighting. Modular daylight control for zone-based switching of indoor lighting. To be used in combination with a photo cell, motion detector(s) and the power supply (360-47000) for switching loads. Automatically switching on depending on the measured daylight level and motion detection. Automatically switching off in case of sufficient daylight or after a switchoff delay. Optional control via a time switch, an NO push button or a four-fold push button with indication LEDs. Provided with four...

DAYLIGHT CONTROL Power supply for daylight control module, 24 Vdc/1 A Power supply for the daylight control module (360-45010 and 360-45011). As stand-alone power supply suitable for the presence detector (350-20110 and 350-20111). Provided with three relay contacts that switch the load. Built-in overvoltage protection. In compliance with the European directives for EMC and safety EN60669-2-1. • power supply voltage: 230 Vac ± 10% • secondary voltage: 24 Vdc ± 10%, max. 1 A • relay contact 1, 2 and 3: NO (max. 10 A) • incandescent lamps: 2300 W • 230 V halogen lamps: 500 W • all low-voltage...

IP54 protection cap for photo cell IP54 protection cap for outdoor applications. Suitable for upgrading the IP20 protection degree of the photo cell (350-10011) to IP54. Complete unit Vandalproof protection cap for wall mounting Metal protection cap for motion detectors (350-20011, 350-20010 and 350-30010). Complete unit Vandalproof protection cap for ceiling mounting Metal protection cap for presence detectors (350-20110, 350-20111, 350-20053, 350-20054 and 350-20055). Complete unit Power supply, 24 Vdc/40 mA, with 10 A contact Power supply for presence detectors (350-20110 and 350-20111)....

lit V DETECTORS AND DAYLIGHT CONTROL MODULES

Technical Information ➀ red ➁ black ➂ grey (motion + lighting) ➃ blue (motion) ➄ black / white ➅ yellow / white ➆ blue / white Power Pack Lighting control with combination of lighting, motion and time For indoor application - with separate light sensor 350-10011 - with separate motion detector 350-2001X For outdoor application with separate motion detector 350-30010 that is provided with an integrated light sensor 24 V detectors and daylight control modules