DINA-DR MICRO DIN rail mounted DMX lighting controller Overview The DINA-DR MICRO is the perfect standalone lighting controller for simple DMX installations. It offers an affordable and programmable solution to replace automatic controllers. Delivered with a DIN rail adapter, the DINA-DR MICRO can be mounted in an electrical cabinet and affords significant ease of installation. Create your static or dynamic lighting scenes with ESA Pro 2 software and upload them to the DINA-DR MICRO through its USB connection. http://www.nicolaudie.com/dina-dr-micro.htm Technical Data DMX Stand Alone controller 60 DMX channels USB connectivity for programming Stand Alone mode with 10 scenes Windows/Mac software to set dynamic colors/ effects • SUT Technology allows the device to be used with other Nicolaudie Group software via an online upgrade Input Power Output Protocol OS Requirements Mac OS X 10.8-10.14 Windows 7/8/10 Standards Optional Accessories POWER 5V AC/DC power supply © Nicolaudie Group 1989-2021. All rights reserved. We reserve the right without notice to amend the technical information and spec

DIN rail mounted DMX lighting controller Technical datasheet DINA-DR MICRO www.nicolaudie.com Button for scene seectionl EASY INSTALLATION 1. Mount a DIN Rail or DIN Rail Encloser against a wall 2. Connect the wires POWER: Connect 5V DC ACDC supply to the USB connector Be sure to not invert the + and the ground. DMX: Connect the DMX cables using the block termina to the lighting receivers pin1 ground pin2 data+ pin3 data- 3. Clip the DINA-DR MICRO onto the DIN RAIL Use the supplied DIN rail adapter to mount the DINA-DR MICRO. Programming the DINA-DR MICRO The controller can be programmed from...