technical-data-sheet-aeroleaf-300w
6Pages

Technical data sheet

Gen The A eral erole spec af ifica tions The Aeroleaf ® is a patented micro wind turbine composed of a double blade with a vertical axis in a shape of a leaf and a synchronous microgenerator with permanent magnets. Driven in rotation by the blade, without belts or gears, the magnets pass in front of the coils and thus generate an alternating current. This is immediately rectified in direct current to be able to sum the currents. The Aeroleaf have an aerodynamic profile optimized to exploit the weakest winds (from 2.5 m/s of wind) as well as the strongest (up to 43 m/s continuously, 50 m/s...

The Aeroleaf are sold individually from 12 pieces. They must be mounted in parallel and connected to its electrical cabinet which contains all the regulatory safety devices as well as a 4x12 V battery pack. The sizing of the Electrical Cabinet depends on the number of Aeroleaf installed. T he Aeroleaf thus form an electrical assembly that is easy to deploy as close as possible to uses, and particularly relevant for exploiting diffuse energies without additional structural cost. Aeroleaf power curve as a function of voltage and rotational speed (rpm) Every 10 milliseconds, the microprocessor...

Elec trica l Spe cifica tions SCHÉMA DE PRINCIPE The electricity produced by each Aeroleaf is immediately rectified to direct current to be routed in parallel to the 48 V battery pack. The sum of the currents is done in the inverter which restores the alternating current directly into the local network of the building or installation (TGBT). New World Wind provides the electrical cabinet in proportion to the number of Aeroleaf chosen. •A buffer battery pack that smoothes the production of electricity over short periods (it is not really a storage battery): - The necessary safety devices for...

Inst alla tion Aeroleaf are ideally placed on roofs and terraces, along roads, on masts, pylons, lampposts, as well as on any support capable of absorbing the forces and vibrations transmitted by the rotating leaf, and while respecting a center distance of 55 cm between each Aeroleaf. It is up to the customer to ensure this before installation. Aeroleaf can be installed by NWW teams or by the customer, subject to compliance with the recommendations established by NWW. In any case, it is up to the customer to prepare: • The supply of cables from the inverter to the technical room or TGBT of...

Sum mary Sum mary table MECHANICAL SPECIFICATIONS Aeroleaf height + flange Minimum distance between 2 Aeroleaf Aeroleaf Weight Minimum number of Aeroleaf to purchase AEROLEAF SPECIFICATIONS Starting speed Maximum wind resistance, continuous (in gusts) ELECTRICAL SPECIFICATIONS Installed power Required voltage Inverter output voltage Installation site Installation time Between 1 and several days depending on the number of Aeroleaf and the complexity of the location Maximum distance between the electrical cabinet and the furthest Aeroleaf Installation Responsibility Preparing the passage of...