DS UTA ELECTROSTATIC FILTER DS UTA electrostatic filters complying with EN ISO 16890 PM1 90%.

GENERAL FUNCTIONS The DS UTA electrostatic filter has been certified by the Polytechnic University of Turin according to EN ISO 16890, a standard that sets the new classification of ventilation filters. Efficiency concerns PM1 - PM2.5 - PM10 and coarse particles, these are the assessment parameters used by WHO. GENERAL DESCRIPTIONS Pocket filter standards 592 x 592 x 292 ref. EN 15805. Made entirely of aluminium (recyclable), the DS UTA filter can be installed into Air Handling Units, Ducted Systems and Roof Tops. Control electronics complete with double filter status reporting, capable of supplying...

All filters have an A+ energy classification, very low pressure drop, max 50 Pa (UNI 16890 test), retention of fine g 320 PM with an air flow rate of 3300 m3/h. DS UTA electronic filters fit on the housing guides of Air Handling Units or Roof Tops in a similar way to pocket filters and no accessories are required. The power supply unit can be connected directly to the filter or by remote control. Only one cable is needed for the electrical connection. When installed in sequence, DS UTA filters do not require any accessories, each filter comes complete with a terminal block contact for ease of...

The test was performed with a 20 mm thick metal pre-filter. Air velocity at various flow rates is on 590 x 590 x 220 surface (as per ISO 16890) DS UTA 590 x 590 x 220 Air flow rate m3/h from m3300- 2800- 2300- 1800 - 1300 3 Retained dust g 320 at max flow rate Pressure drop at max speed with dirty filter Pa 50 Weight Kg 19 Power consumption W 24 PM Efficiency 1 min %85 max %95 Efficiency EN 779 F8 to F9 DS UTA 590 x 490 x 220 Air flow rate m3h from m2500- 2100- 1850- 1300 - 900 3 Retained dust g 230 at max flow rate Pressure drop at max speed with dirty filter Pa 35 Weight Kg 16 Power consumption...

via Salvatore Quasimodo, 3/A 46029 Suzzara (Mantova) - Italy [email protected] - www.tondair.it