urface Basin Model 9121 DESCRIPTION | ORIENTATION - Req uired Selection □ Standard Arm/ Wall Mounted Carrier Suggested for residential/ light commercial applications □ Commercial Floor Mounted Arm/Carrier Required for commercial application (requires 2" x 6" wall construction) MODEL/OPTION # INIT. CONSTRUCTION INFORMATION Wall Thickness:_ Wall Type_ (e.g. drywall with tile, concrete, etc.) For wall mounted faucet □ Single Hole 01-5/16" Centered Hole Patented D727,475 Model Shown: 9121 With Dyson Airblade™ Wash & Dry WD04 30" Wide Solid Surface Deck with Integrated Basin & Optional Trap Enclosure • WALL MOUNTED 30" LENGTH SOLID SURFACE DECK WITH INTEGRATED BASIN • INTENDED TO BE UTILIZED WITH DYSON AIRBLADE™ FAUCETS • ACCOMMODATES HEAVY-DUTY COMMERCIAL FLOOR MOUNTED CARRIER • ADA COMPLIANT (WHEN PROPERLY INSTALLED) • OBC COMPLIANT (when properly installed) (ONTARIO BUILDING CODE - CANADA) COUNTER COLOR SELECTION - Required Selection init. Corterra® Solid Surface Color □ Blanco (White) - RDC10 □ Grey Goose (Gray) - RDC14 H FAUCET AND CONFIGURATION - Required Selection init. □ No Faucet Hole □ Dyson Airblade™ Wash & Dry WD04 Deck Mounted Short Faucet □ Dyson Airblade™ Wash & Dry WD06 Wall Mounted Faucet Customer is required to submit faucet spec sheet to confirm compatibility with Neo-Metro's faucet drilling. li BACKSPLASH - Req uired Selection init. TRAP ENCLOSURE - Optional Selection init. □ Trap Enclosure -TE □ Satin Finish (Standard Finish) - S □ Gloss White - EG10 PRODUCT OPTIONS - Optional Selection init. □ Chronomite Electric Water Heater -HTR Recyclable Product ASSE 1070 Tempering Valve N E O - M E T R O A Member of Morris Group International Morris Group 15125 Proctor Avenue • City of Industry, CA 91746 USA 800.591.9050 • 626.855.4854 • Fax 606.937.4725 Latest product information www.neo-metro.com Tech Sheet: TS9121 Page 1/2 Last Revised: 07/27/2018

30” Solid Surface Basin Counter with Integral Basin is constructed of Corterra recycled solid-surface polymer resin and is ICPA SS-1 approved. Corterra uses a minimum of 15% post-consumer recycled material and a minimum 5% rapidly renewable material derived from biobased sources. Fixture includes grid strainer, and continuous waste piping with 1-1/2" P-trap. Note: To Insure proper drainage use the supplied grid strainer. This product is not to be utilized with a “pop-up” type drain fitting. The deck is configured for carrier mounting A commercial floor mounted arm/carrier (-MC-FLR) is available...