NedZink NOIR Pro-Tec
2Pages

Pre-weathered titanium zinc with protective coating on the back NedZink NOIR Pro-Tec Product description NedZink NOIR Pro-Tec is pre-weathered titanium zinc (EN 988) with a protective coating on the back side for application on either cold-or hot roof constructions. This protective coating protects the zinc against the effects of water vapour and other substances. The good processing properties of zinc are retained. NedZink NOIR Pro-Tec can be used in all standard systems, but is mainly recommended for unventilated, dampproof hot roof and façade constructions Standard NedZink NOIR Pro-Tec is provided with an AFP Coating (Anti-Fingerprint) on the front side to avoid fingerprints during application and assembly. NedZink NOIR Pro-Tec is supplied with a foil on the surface to protect the surface during transport and assembly. The chemical composition, mechanical and physical properties and measurement tolerances of the base material are stipulated on the KOMO product certificate and the product certificate from Lloyd’s Register, LRIQS (Approval QIS 122). The material properties are verified by an independent and neutral research institute on a random basis. The product certification and the ISO 9001:2008 certificate for the quality management system at NedZink assure a constant and uniform high quality, meeting our own standards and far exceeding EN 988. The Pro-Tec protective coating on the backside suffices with regard to various quality requirements set in ‘EN 13523’ and ‘EN 4628’. NedZink standing seam system Pro-Tec protective coating Separating layer Subconstruction Gutters Roofs and outer walls Dormer side Flat roofs NedZink NOIR Pro-Tec is provided on a project basis.

Transport and storage NedZink products are packed and sent dry. The advice is to store titanium zinc dry and ventilated. This reduces the probability of condensation formation. Processing NedZink NOIR Pro-Tec is assembled with the NOIR side on the outside. NedZink NOIR Pro-Tec has to be installed in the direction indicated by an arrow on the back, this must always be respected. NedZink NOIR Pro-Tec is supplied with a foil on the surface to protect the surface during transport and assembly. This foil should be removed immediately and in one smooth motion after assembly at the construction...