THE WORKING PLATFORM SOLUTION
5Pages

THE WORKING PLATFORM SOLUTION

The Working Platform Solution Every year, cranes, piling rigs and rotary drill rigs fall over or become unstable due to in Every year, cranes, piling rigs and rotarymaintained onsite ground conditions. Theseto inadequately pre- cause pot prepared or drill rigs fall over or become unstable due types of events can pared or maintained onsitefatalities,conditions. These types of events can cause potential fatalities, ground serious injuries and cause extensive damage to equipment. serious injuries and cause extensive damage to equipment. Therefore temporary granular platforms are now becoming a...

The methods and the assumptions used can include: • Increased angle of load distribution • Enhancement of formation bearing capacity • Experimental determination of load distribution improvement factor (for reinforced vs unreinforced platforms) • Use of bespoke partial factors When using the advice and design methods provided by geosynthetic manufacturers it is also recommended that: • Experimental testing and theoretical design is representative of actual installation and use conditions. • Experimental testing and theoretical design are validated by representative case studies. • Products...

Advantages of Secugrid® and Combigrid® • Very high strength at low strains • Immediate interlocking effect • High angles of friction due to textured geogrid surfaces • High aperture stability • High radial stiffness • Uniaxial geogrid strengths up to 500kN/m • Available with bonded Secutex® nonwoven (Combigrid®) • Quick and easy to install • High resistance to installation damage • Made from uniformly extruded solid PET or PP bars • High resistance against biological and chemical attack Secugrid® Soil Reinforcement - Technical Back-up Secugrid® geogrids are manufactured from high-quality...

low elongations reduces deformations in the subgrade and preserves the reinforced surface. The bearing capacity of the reinforced aggregate layer is increased. The maintenance needs are greatly reduced and the service life is extended. Independent testing has shown the beneficial impact of the high radial stiffness of Secugrid® (figure  when compared to similar available 5) products in base course structures. NAUE manufactures Secugrid® in various common and project-specific tensile strengths to meet individual project design and specification requirements. Easy installation on the jobsite...