PROFORM® BRAND XP® READY MIX JOINT COMPOUND WITH DUST-TECH1 National Gypsum Company Technical Information: Internet Home Page: ProForm® BRAND XP® Ready Mix Joint Compound with vinyl based joint compound reduce airborne dust while sanding, and saves time with quick and easy clean-up. XP Joint Compound reduces airborne dust by 60% thereby reducing its impact on indoor drywall finishing, texturing, MOLD RESISTANCE XP Joint Compound with Dust-Tech offers superior mold resistance and achieves the highest mold resistant scores on industry tests. When tested in a system with ProForm BRAND Paper Joint Tape, Gold Bond® BRAND XP® Gypsum Board or Gold Bond® BRAND 62XP® Interior Extreme™ Gypsum Panels, complete wall system with enhanced resistance to mold. • Reduces airborne dust by 60%, saving time with quick, easy clean-up. • Resists the growth of mold per ASTM G 21 with a score of 0, the best possible score. • Resists the growth of mold per ASTM D 3273 with a score of 10, the best possible score. • Sands without clogging • Low VOC content - Less than walls and ceilings by adjust- various texture tools such as drywall knives, stippling brushes, trowels and other texturing tools. • Can be used to repair cracks gypsum board to other surfaces such as masonry or other layers of gypsum board. • Excellent adhesion and bond. GREENGUARD CERTIFIED Compound with Dust-Tech SfSSS WREENGIMT bnaf Formula • Protect from freezing and exposure to extreme heat and direct sunlight, conditions that will cause premature • Excessive mixing with an electric drill can cause unde- sirable changes in viscosity Storage life varies with climatic under good conditions. Store compound away from extreme cold or heat to avoid accelerated aging. Regularly check production dates and rotate inventory on a first-in, first-out plan. If XP Joint Compound with Dust-Tech freezes, allow material to thaw at room tem- perature for at least 24 hours. When thawed, turn container (Continued next page) BASIC USES XP Joint Compound with Dust-Tech is designed for tape application, fastener spotting and complete joint finishing of gypsum board. It can also be used to repair cracks in plas- tered walls, to texture surfaces and to laminate gypsum board to other surfaces such as ma- sonry or other gypsum board. It contains sufficient binder to secure the reinforcing tape ProForm® is a registered trademark of National Gypsum Properties, LLC.

15 minutes. Turn pail right immediately remix with an electric drill. XP Joint Compound should be lump free and ready to use within 1 minute. Discard all XP Joint Compound that does not TECHNICAL DATA • ProForm Joint Tape • Multi-Flex Tape • Cornerbead, trims, casing • E-Z Strip control joints or .093 zinc control joints COMPOSITION & MATERIALS PACKAGING & COVERAGE ^Coverage varies with number of cornerbeads and trims used. APPLICABLE STANDARDS AND REFERENCES National Gypsum Company, Gypsum Construction Guide ProForm BRAND, Dry wall Finishing Products Construction Guide APPROXIMATE DRYING TIMES...