PROFORM® BRAND ULTRA LITE ALL PURPOSE JOINT COMPOUND National Gypsum Company Technical Information: Internet Home Page: ProForm® BRAND Ultra Lite All Purpose Joint Compound is a vinyl base ready mix lightweight joint compound. conventional weight joint compound, Ultra Lite pull and sands easier and reduces BASIC USES Ultra Lite Joint Compound is designed for tape application, complete joint finishing of gypsum board. It can also be used to repair cracks in plastered walls, to texture gypsum board to other surfaces such as masonry or other gypsum board. It contains sufficient binder to secure the reinforcing tape conventional weight joint • Applies and sands with ease. • Excellent open time. • Superior bond with ProForm® BRAND paper joint tape. • Can be used in all taping tools. • Eliminates the need for more than one type of compound • Low VOC content - less than GREENGUARD CERTIFIED ProForm Ultra Lite All Purpose Joint Compound is GREENGUARD Children & PprfifipH Children t Sdwoli • Use nothing coarser than a 150 grit sandpaper or a 220 grit abrasive mesh cloth for any • Protect from freezing and exposure to extreme heat and direct sunlight, conditions which will cause premature • Excessive mixing with an electric drill can cause viscosity and in finished surface Storage life varies with climatic under good conditions. Store compound away from extreme cold or heat to avoid accelerated aging. Regularly check production dates and rotate inventory on a first-in, first-out plan. If Ultra Lite Joint Compound freezes, allow material to thaw at room temperature for at least 24 hours. When thawed, turn the container 15 minutes. Turn pail right immediately remix with an electric drill. Ultra Lite ready to use within 1 minute. Discard all joint compound that does not remix to a lumpfree consistency. Ultra Lite pails should not be stacked more than two • ProForm Joint Tape • Cornerbead, trims, casing • Multi-Flex Tape • E-Z Strip control joints or .093 zinc control joints Submittal Approvals: (Stamps or Signatures) ProForm® is a registered trademark of National Gypsum Properties, LLC.

TECHNICAL DATA PACKAGING & COVERAGE ^Coverage varies with number of cornerbeads and trims used. Ultra Lite Joint Compound is available in Atlantic, Gulf, Northeast and Southeast areas. APPLICABLE STANDARDS AND REFERENCES National Gypsum Company, Gypsum Construction Guide Pro Form BRAND, Drywall Finishing Products Construction Guide APPROXIMATE DRYING TIMES Note: R.H. = Relative Humidity D = Days (24 hour period) H = Hours The chart above is a helpful guide in determining approximate drying times for joint compounds under a variety of humidity/temperature conditions. Shaded area is below the minimum...