PROFORM® BRAND QUICK SET™ LITE SETTING COMPOUND National Gypsum Company Technical Information: Internet Home Page: Pro Form® BRAND Quick Set1" Lite Setting Compound is compound that is 30% lighter than conventional setting sanded and requires less time BASIC USES Quick Set Lite Compound provides a lightweight, easy to sand finish for fast, smooth joint finishing. Quick Set Lite is specially excellent joint strength, even in poor drying conditions. Quick Set Lite permits heavy fills and faster joint finishing Quick Set Lite is compatible with all types of gypsum where a shortened joint finishing schedule is desired. Quick Set Lite is used as a prefill material for gaps in gypsum board construction that are wider than voids in above-grade interior MOLD RESISTANCE Quick Set Lite Compound offers superior mold resistance mold resistant scores on industry tests. When tested in a system with ProForm® BRAND Paper Joint Tape, Gold Bond® BRAND XP® Gypsum Board or Gold Bond® BRAND system achieves a score of wall system with enhanced • Resists the growth of mold per ASTM G 21 with a score of 0, the best possible score. • Resists the growth of mold per ASTM D 3273 with a score of 10, the best possible score. • Hardens quickly and easy to sand, allowing faster joint lighter than conventional ProForm Joint Compound. • Greater joint strength with exceptional bond. moisture when hardened and • Permits same-day joint greater flexibility. finishing, including taping, finishing, filling, patching, skimming, laminating and even GREENGUARD CERTIFIED ProForm Quick Set Lite Setting Children & Schools™ Certified Indoor Air Quality Certified • Not to be applied over moist surfaces or surfaces subject to material. Use only clean, drinkable water. • Mixing equipment and tools must be thoroughly cleaned between batches. • Each fresh batch of compound must be kept free of previous batches; otherwise, the working life Submittal Approvals: (Stamps or Signatures) ProForm® is a registered trademark of National Gypsum Properties, LLC.

• High-speed mixing or excessive mixing will shorten the working • Do not add water or remix after compound begins to thicken Storage life in high humidity area is 6 months; other areas, up to TECHNICAL DATA • ProForm Fiberglass Mesh Tape • ProForm Joint Tape • Multi-Flex Joint Tape • Arch cornerbead • Casing beads • E-Z Strip Control Joint PACKAGING & COVERAGE ^Coverage varies with number of cornerbeads and trims used. APPLICABLE STANDARDS AND REFERENCES National Gypsum Company, Gypsum Construction Guide ProForm BRAND, Drywall Finishing Products Construction Guide APPROXIMATE WORKING TIME vs...

Before paint, wall covering or other decorating materials are applied, all areas must be thoroughly dry, dust free and treated with a coat of good- quality, high solids, flat latex give the specified or desired Recommended Specification for Levels of Gypsum Board Finish, should be referred to level of finishing needed to assure a surface properly desired decoration. Enhanced Mold Protection