Catalogs >
National Gypsum >
ProForm Paper Joint Tape

ProForm Paper Joint Tape
2Pages

Catalog excerpts

09 29 00 PROFORM® brand JOINT TAPE MANUFACTURER National Gypsum Company 2001 Rexford Road Charlotte, NC 28211 (704) 365-7300 Technical Information: 1-800-NATIONAL (1-800-628-4662) STACKING ProForm Joint Tape should not be stacked more than two pallets in height. MATERIAL Cross-fibered paper 2-1/16" wide Fax: 1-800-FAX NGC1 (1-800-329-6421) Internet Home Page: nationalgypsum.com nationalgypsum.com/espanol 09 29 00/NGC BuyLine: 1100 DESCRIPTION ProForm® brand Joint Tape conceals and reinforces gypsum board joints. The tape is buffed on both sides to ensure the best working qualities and bond. A center creasing process allows easy folding for use at corners. TECHNICAL DATA PACKAGING & COVERAGE 75 ft. (22.8 m) Roll - 20 per Carton BASIC USES 200 250 ft. (76.2 m) Roll - 20 per Carton 665 500 ft. (152.4 m) Roll - 10 per Carton ProForm Joint Tape is designed for use with ready mix or setting-type joint compounds and gypsum veneer plaster systems to conceal and reinforce joints of interior walls and ceilings. 1,330 C overage - Approximately 375 ft. per 1,000 sq. ft. of gypsum board (Continued next page) ADVANTAGES • Buffed on both sides for better bond. • Center crease for ease of folding at corners. • Easy to apply. • High strength to resist distortions such as stretching, wrinkling and tearing. Job Name____________________________________________________________ Contractor_______________________________________ Date_________________ Submittal Approvals: (Stamps or Signatures) DELIVERY AND STORAGE OF MATERIALS All materials should be delivered in their original, unopened packages and stored off the ground in an enclosed shelter and protected from weather. Damaged or deteriorated materials should be removed. ProForm® is a registered trademark of National Gypsum Properties, LLC. 09 29 00 Coverage Package Sq. Ft. per roll

Open the catalog to page 1

APPLICABLE STANDARDS AND REFERENCES National Gypsum Company, Gypsum Construction Guide Pro Form BRAND, Dry wall Finishing Products Construction Guide JOINT COMPOUND DRYING TIME GUIDE Approximate Drying Times: Ready Mix Joint Compound Note: R.H. = Relative Humidity D = Days (24 hour period) H = Hours The chart above is a helpful guide in determining approximate drying times for joint compounds under a variety of humidity/temperature conditions. Shaded area is below the minimum application temperature requirement of 50° and is not recommended for the application of joint compound....

Open the catalog to page 2