Gold Bond Extended Exposure Shaftliner Area Separation Fire Wall System

Gold Bond BRAND eoa? Extended Exposure Shaftliner Shaftliner is a moisture and mold resistant shaftliner panel with a fire-resistant Type X core. G2XP Shaftliner is manufactured with an enhanced moisture and mold resis- tant core and facer. The purple facer is composed of a coated fiberglass mat which provides superior weather resistance capabilities. 62XP Shaftliner is specially coated on the front, back and edges for easy handling. The panel's long edges are double beveled for ease Basic Uses designed to be used to construct lightweight fire barriers for cavity shaftwalls, stairwells and area...

Steel H-Stud framing members are attached on each side to adjacent framing with breakaway, heat softenable aluminum ASW Clips. Basement wall section - length equal to distance from foundation floor to approximately 3 " above floor line of first floor. Intermediate floors - length equal to distance between floor lines. Topmost floor - length to extend to top of parapet wall or to roof intersection, depending on detail. Basement Wall Installation 1. Beginning at foundation floor, attach 2" C-Runner to concrete with power-driven fasteners spaced 24" o.c. Apply acoustical sealant along edges of runner...

Technical Data ■ Edges: Double beveled Applicable Standards Composition & Materials with a moisture and mold resistant core and facer. The facer is composed of a coated fiberglass mat which provides superior weather resistant special additives in the fire-resistant Type X gypsum core to enhance its fire-resistive properties. Fire Resistance Ratings approved for inclusion in specific Fire resistance ratings represent the results of tests on assemblies made up of materials authorized by National Gypsum in specific configurations. When seleding construction designs to meet certain fire resistance...

AREA SEPARATION FIREWALL LIMITING HEIGHTS sections below wall sections • Gypsum Board • Fire Blocking Mineral Wool Area Separation Wall Clip The framing attachment ASW Clips are made from 0.050" aluminum alloy that softens at about 1000°F. They are formed in the shape of an angle and are available 2" wide with legs either 1 " x 2", 1 " x 2.5" vertical steel H-Stud framing using one 3/8" Type S pan head screw and to adjacent wood framing with one 1-1/4" TypeW Screw. 063" Thick available on special order TYPICAL FLOOR/CEILING JUNCTURE Fire Blocking Mineral Wool

CUSTOMER SERVICE SALES AREAS Gulf Area Southeast Area National Accounts Manufactured Housing Gold Bond* BRAND Extended Exposure LIMITED WARRANTY LIMITED WARRANTY National Gypsum Company ("NGC") warrants to the owner at the time of installation of any building on which such product is installed, that subject to the conditions and limitations I. e2XP* Shaftliner will at the time shipped by NGC be free from defects in material and workmanship that would make it unsuitable for its intended use ("Defects Warranty"); and 2. e2XP* Shaftliner will not deteriorate or delaminate as a result of exposure...