*myarchiexpo

Homega

Product catalog summary

Introduction
NUDURA offers a range of expanded polystyrene (EPS) insulation products, including the HOMEGA® molded insulation panel. This product is designed for use in various construction and renovation projects to enhance comfort and energy efficiency.

Product Specifications
HOMEGA® panels measure 4 ft x 8 ft (1219mm x 2438mm) and feature three integrated strapping strips spaced 16 in (406mm) apart. The panels are shiplapped on all sides and available in thicknesses of 2 5/8 in (67mm), 3 1/2 in (89mm), and 3 7/8 in (98mm), providing an R value of R-10 to R-15.

Applications
The panels can be used for insulating foundation walls, floors, interior and exterior walls, and ceilings. They are suitable for both residential and commercial applications.

Installation Guidelines

Use mechanical anchors for basement insulation.
Seal cut spaces with NUDURA low-expansion spray foam.
Install drywall directly onto the insulation boards’ furring strips.
A vapor barrier is not required if panels are installed at full height and width.
For floor insulation, use solvent-free glue to prevent movement.
Cross plywood joints with HOMEGA insulation board’s joints and screw at 12 in (305mm) intervals.

Environmental and Safety Considerations

100% recyclable and free from CFCs or HCFCs.
Resistant to water and moisture, preventing mildew.
Non-toxic, composed of 98% air and 2% material.
Flammable; interior applications require a protective barrier.

Certifications and Standards
The product is ISO 9001:2008 certified and meets the ULC S701 standard as certified by Warnock Hersey (WH).

Product Advantages

Superior physical properties due to molded panel design.
Flexibility to cut into any shape or size.
Better seal with shiplapped edges.
Uniform temperature for increased comfort.
Interlocking airtight design.

Recommendations
Professional installation is recommended, and all installations must comply with the National Building Code. For further details, visit www.nudura.com or contact their experts.

Catalog excerpts

Molded Insulation Panel with Integrated Strapping FOUNDATION WALL INSULATION PRODUCT Insulating your house is an important first step towards ensuring your comfort and well-being. NUDURA offers a complete range of expanded polystyrene (EPS) insulation products to use in your renovation and construction projects. HOMEGA® is a 4 ft x 8 ft (1219mm x 2438mm) individually molded insulation panel with three integrated strapping strips 16 in (406mm) apart centre-to-centre and shiplapped on all 4 sides. It is a unique, patented, 2-in-1 system offering superior performance. It can be used to insulate foundation walls and floors, interior and exterior walls and ceilings. The panel comes in thicknesses of 2 5/8 in (67mm), 3 1/2 in (89mm) and 3 7/8 in (98mm), allowing you to reach an R value of R-10 to R-15.

Open the catalog to page 1

PRODUCT ADVANTAGES Economical Insulation Advantages • 2-in-1 product: insulates concrete slab and supports pipes • Molded panel: superior physical properties • Permanent insulation value • Flexibility to cut any shape or size • Energy savings: reduced heating bill • Better seal: shiplapped on all sides • Quick and easy installation • Increased comfort as a result of uniform temperature • Interlocking air tight design • Inorganic and rot-proof materials • Resistant to water and moisture that can cause mildew INSTALLATION TIPS For basement insulation, install the boards using mechanical anchors....

Open the catalog to page 2

All NADURA catalogs and technical brochures

Archived catalogs

NUDURA | Construction Professional Brochure
12 Pages
Product Guide
12 Pages