*myarchiexpo

Snakky

Product catalog summary

Payment Systems
The Snakky vending machine is equipped to support systems with Executive and MDB protocols, as well as validators. It can accommodate a change-giver, validator or coin mechanism, bill acceptor, and cashless systems with key or card. Pre-cut panels are available to facilitate these installations.

Accessories
The Snakky offers various accessory kits including a photocell kit, coin box lid kit, lift-up kit, and others for enhanced functionality such as dispensing 0.5 litre bottles upright and bidirectional drawer motors for long products.

Characteristics
The Snakky is compact with a height of 1700 mm, extendable to 1830 mm with a lift-up kit. It is designed for medium-sized locations with limited space. The machine features a patented ergonomic delivery bin with anti-theft and slow closing mechanisms. It includes a slide-in/slide-out cooling unit for easy maintenance and a separate compartment for payment systems and electronic boards.

User Interface
The interface includes a numeric membrane keypad with optional direct selection buttons, a tilted alphanumeric display, and a sound signal for completed vend cycles. The ergonomic delivery bin allows easy product retrieval.

Design
The Snakky coordinates with the Kikko drinks machine for a complete vending solution. It features a rounded shape, glass front door with an anodised aluminium frame, and a stylish foot cover panel.

Temperature Control
The machine can maintain a uniform temperature (7-9°C) or a stratified temperature (7-9°C in lower trays, 12-15°C in upper trays) by adjusting airflow.

Electronic Control
It features a 16-bit electronic control with flash EPROM, compatible with the "Flash" PC application. It can be connected via RS232 or Up-Key and can operate in master or slave mode with other machines.

Innovations
The Snakky includes side air vents for wall placement without cooling unit damage, a highly recyclable insulation type, and a lock with a programmable code.

Catalog excerpts

PAYMENT SYSTEMS The Snakky is pre-set for the installation of systems with Executive and MDB protocol as well as for the installation of validators. At the same time the following can be fitted: - Change-giver, validator or coin mechanism. - Bill acceptor. - Cashless system with key or card. There are pre-cut panels to facilitate the above. ACCESSOIRES Photocell kit Coin box lid kit Lift-up kit Kit for dispensing 0.5 litre bottles in upright position Wall fixing brackets kit Bidirectional drawer motors kit (for dispensing long products) Master/slave connection kit Rear panel kit (rear cover for Snakky/Snakky SL & Kikko installation) RS232 jack kit Keypad protection kit 4 direct selection buttons kit Photocell kit In the event of a failed vend, the user does not lose the inserted money as the spiral will retry dispensing the product. If unsuccessful, a second selection can be made or money returned. POWER CONSUMPTION For each hour of stand-by Ambient temperature Refrigerated box temperature Overall depth with door open Power supply voltage EXAMPLES OF POSSIBLE CONFIGURATIONS Power supply frequency Absorbed power 6 snack trays 27 selections / 338 products 3 snack trays 14 selections / 185 products 1 bottle tray 6 selections / 36 products 2 can trays 12 selections / 72 products Maximum operating conditions AVAILABLE SPIRALS AND PRODUCT CAPACITY USEFUL PITCH HALF TURN The numbers in the table indicate the product capacity N&W GLOBAL VENDING S.p.A. Via Roma, 24 24030 Valbrembo (BG) Italy Ph. +39 035 606111 - Fax +39 035 606519 www.nwglobalvending.com N&W Global Vending reserves the right to alter specifications without not

Open the catalog to page 1

SNAKKY Compact and highly flexible Maximum use of size/capacity ratio Side air vents allow the Snakky to be placed against a wall without damaging the cooling unit Snakky is the first snack vending machine made by Necta with a height of only 1700 mm, however, can be increased to 1830 mm by fitting the optional lift-up kit. The compact Snakky offers the ideal refreshment service to medium size locations and sites where space is limited, due to its size and innovative design. Side panels provide a useful hot-air outlet, which allows the Snakky to be placed against a wall without damaging the cooling...

Open the catalog to page 2

Snakky

Snakky

Catalog excerpts

All N&W Global Vending catalogs and technical brochures