Lesiure - Free shape Splash Pad (Fiberglass)
23Pages

SPLASH & PLAY Free shape Free shape

On the following pages you will find detailed descriptions of all spray features.

Created in an interesting organic form, the structure has a non-skid entry ramp up to the slide at 30” height (750 mm). A cross bar forces the children to sit before descent. Laminar jets create an interesting presentation of water flow in the form of multiple jets emitting from the outer shell of the slide. The slide can also be used without the piped in water source for retrofitting into existing shallow pools.

The Aquaflo is an interactive spray structure suitable for installation in a spray park application or shallow pool. The horizontal section will contain an array of nozzles along its center line emitting a series of soft sprays upwards. Children interact with water by covering nozzle with fingers causing the other jets to go higher, several participants can contribute to play at one time.

Aqualab is a 3-tiered playtable with a series of activities intended for children up to the age of 5. This unit is an excellent low level feature for interactivity with parents and tots.

The unit is actuated by twisting the handles towards the player sending a stream of water from the nozzle jet. It can be aimed side to side or up and down at targets or other participants and when handle is released the water shuts off. This unit is excellent for interactivity with parents and children alike.

The water feature is formed by turning the diverter wheel, one turn of the wheel will send water to the top whirling rotor spraying a soft peripheral spray while the second turn gives a perimeter water curtain from the center of the body.

Aquacaps Trio The spray features are provided by a hemisphere smoothly contoured into a flared base component each structure at varying heights. The sphere contains an array of nozzles around their upper hemisphere emitting a series of soft sprays outwards.

The unique looping shape of this unit creates an interesting presentation for the water flow, water is pumped in creating a series of laminar jets fanning out from the upper curve. The unit is a low level structure for interaction of parents and children alike. As the hand covers one nozzle the others increase in height, with several nozzles covered at one time participants can create a geyser water effect.

Aquaflor Poppy The water feature is formed by pumping water into the structure thus activating the large spinning domes on top of structure providing an outward spiral water effect.

The Aquatwirl is a high level interactive spray structure designed in a unique zigzag contoured upright column which provides a twirling water spray event. The water feature is formed from a constant flow of water that is pumped into the unit at a pressure level to allow the top flower graphic to spin thus creating a twirling array of water effects. This is a high level water feature allowing interaction of parents and children alike.

This L-shaped structure creates a super-soaking wall of water in the form of several soft laminar jets forming a water curtain from above. It’s an excellent way to create a high water effect for patrons of all ages.

Aquabow Trio The structure shall provide series of three arches in various heights which contain cone spray nozzles, water is pumped into the units emitting a soft conical spray inwards. The unit is a high level unit suited for the smaller children and adults alike and can be installed as a spray tunnel. On sunny days a rainbow effect will appear in the spray.

The Watertotter is an aquatic teeter-totter suitable for installation in shallow pools with depths of 6” (15cm) to 12” (30cm) of water. The unit contains its own pump and draws water directly from the pool, eliminating the need for a piped-in water source. The unit works perfectly both as a retrofit or new pool installation. The unit generates a pulsating jet spray from the nozzle in each handlebar as the patrons go up and down, squirting water back and forth

A water diverter wheel is installed in the column for manual actuation allowing participants to divert water for the different water features above. The water feature is formed by turning the diverter wheel, each turn shall activate one of the spinning domes on top of structure providing an outward spiral water effect.

The structure set is comprised of four components, two Aquashooters and two receivers with tipping vessels. The object of the duel is for the participants to aim the stream of water from the Aquashooter to hit the large flare target filling the other’s vessel, thus dumping a soft spray of water on their opponent first. This unit is excellent to create a high level water effect that parents and children alike can enjoy.

SPLASH POOL In a Splash Pool, children play in 25cm deep warm water. The element of water can be experienced in all areas. The standing water prevents running and fast movements. With our SoftWalk technology, the pools have the highest possible level of safety and comfort.

Life Floor SPLASH PAD With a Splash Pad, children play on a wet floor with no standing water. The water is collected by drains at various points on the Splash Pad. Different pad surfaces such as PVC with our SoftWalk technology, EPDM or Life Floor can be offered. All solutions offer slip and fall protection for the safety of all guests.

SOFT WALK SAFETY & COMFORT Fall protection and Anti-Slip-Technology ensure the safety of children. Safety and comfort are among the most important features of a Splash Pad or Splash Pool. INDUSTRY-LEADING WARRANTY Our SoftWalk-Technology guarantees the waterproofness of our Splash Pads and Splash Pools. A vacuum test procedure after installation and a 10-year guarantee speak for the high quality.

CLEAN DESIGN A unique anchoring system conceals all hardware to create a safe, smooth pad surface and clean design aesthetic. INSTALLATION & MAINTENANCE Our Splash Pads and Splash Pools are designed for quick and easy installation. Features can be removed as needed for easy and convenient maintenance routines.