Edelstahlmanufaktur GmbH

VARIO ST. 1005.VA The Vario system represents the ideal solution for Overview: curved runner rails and is easily adaptable to custom + One-of-a-kind solution for sliding specifications. Vario could also be used with curved straight doors along curved walls door leaves. Runner rail fixtures are available for wall, glass and ceiling installation. + System also suitable for curved door Two glass point fixations guarantee high- est possible leaves (variant ST.1005.VAR/ radius stability and allow for a subsequent height adjustment up to min. 750 mm) up to 2 mm. + Custom planning of the complete system...

Technical highlights from Vario sliding doors with top rollers ADJUSTABLE LIFT-OUT 360° SWIVEL JOINT RAILS MADE OF SOLID STAINLESS STEEL + Virtually silent running, solid material does not generate resonances + High load capacity of the entire construction (e.g. for partition walls, glass cabins, skylights) MWE Edelstahlmanufaktur GmbH I Am Steinbusch 7 I 48351 Everswinkel I Fon: +49 25 82-99 60-0 I [email protected] I www.mwe.de MWE Edelstahlmanufaktur GmbH I Am Steinbusch 7 I 48351 Everswinkel I Fon: +49 25 82-99 60-0 I [email protected] I www.mwe.de

Ceiling Mount with height adjustability Alternative ceiling connection plate available with Ø 60 mm for sliding systems: ProTec, Klassik, Supra, Twin, Duplex, Duplex S, Vario, Spider and Chronos – incl. Drilling * only edge polished! Ceiling Mount without height adjustability +/- 4 mm Height adjustment after assembly! MWE-Soft-Stop for Round Rail Ø 25 mm Corner rail connector Connector for multi-part rail Front end rail mount - for perpendicular walls Attention: max. door weight 220 Lbs. Minimum width of the door leaves 485 mm Cover plate is made of polished aluminum ST.2090.V for sliding door...

Metamorphosis The Vario system offers a unique solution for guiding straight or curved door leaves along curved tracks. This means that architects and planners can now easily implement particularly creative designs, for example for counter installations and reception areas with door elements that move along organically curved forms. VARIO 2013 NEW: Perfected motion through flexibly mounted double roller system MWE Edelstahlmanufaktur GmbH I Am Steinbusch 7 I 48351 Everswinkel I Fon: +49 25 82-99 60-0 I [email protected] I www.mwe.de The ambition to keep perfecting this unique fitting eventually led...

Force distributed uniformly by flexible roller bearings Ball-bearing-mounted precision rollers Retainers with eccentric adjustment 3D diagram Vario roller carriage system 2013 model Hole offset through eccentric ring Glass point holders with magnetic screw caps MWE Edelstahlmanufaktur GmbH I Am Steinbusch 7 I 48351 Everswinkel I Fon: +49 25 82-99 60-0 I [email protected] I www.mwe.de MWE Edelstahlmanufaktur GmbH I Am Steinbusch 7 I 48351 Everswinkel I Fon: +49 25 82-99 60-0 I [email protected] I www.mwe.de

Good question: Why do two rollers run better than one? Using two rollers enlarges the area for lateral guidance. This steers the roller carriage earlier and more dynamically around the curve. The flexible bearing of the roller carriage prevents tilting and ensures the even distribution of forces for smooth running. Nice side-effect: this change made it possible to reduce the narrowest radius for the track to 350 mm. Extreme door movements can thus be made in the smallest of spaces. Flexible roller bearings ensure an even distribution of forces Many customers see the planning of curved door systems...