CONTEMPORARY DRINKING FOUNTAINS BARRIER FREE, WALL MOUNTED, ANGLED, BI-LEVEL DRINKING FOUNTAIN STANDARD FEATURES n n n n n n n n n n Both Child or Adult ADA Compliant (when properly installed) Optionally Available with “Hands Free” Controls 18 Gauge, 304 Stainless Steel Bowls 12 Gauge, Heavy Duty Stainless Steel Arm, Corrosion and Scratch Resistant Finish Heavy Duty Stainless Steel, Vandal Resistant Bottom Access Panels 1/4” Thick Stainless Steel Mounting Plate Pushbutton With Cartridge Valve Assembly Polished Stainless Steel, Anti-Rotation, Non-Squirt Bubbler Resistant to Sunlight, Heat, Moisture and Wear 100-Mesh Inlet Strainer Model: GRE27-R Shown “FOR INDOOR AND OUTDOOR USE” (Must Specify) SUGGESTED SPECIFICATIONS Wall Mounted Round Bi-Level Drinking Fountain shall be Murdock model GRE24. Drinking Fountain shall be 18 gauge, type 304 stainless steel bowls with a 12 gage, heavy duty stainless steel support arm. Provide 1/4” thick stainless steel mounting plate to securely anchor unit to wall. Access Panels shall be secured with vandal-resistant stainless steel screws. Unit shall be activated by a front mounted, self-closing Pushbutton with Cartridge Valve Assembly, using less than 5 pounds of force to activate with an adjustable stream regulator controlling the water flow. Bubbler shall be polished stainless steel with a Non-Squirt feature and operate on water pressure range of 20105 PSIG. P-Trap shall be installer provided behind wall (Optional -PT P-Trap with access below fixture is available). Fountain to be compliant to ANSI A117.1, Public Law 111-380 (NO-LEAD), CHSC 116875 and NSF/ANSI 61, Section 9. Fixture to meet ADA, ADA Standing Person, and ADA Child requirements when mounted appropriately. Satin Stainless Finish Green Powder-Coated Red Powder-Coated Blue Powder-Coated (Shown) Custom color finishes available upon request ADA DRINKING FOUNTAIN ORIENTATION (Must Specify) ADA Drinking Fountain Left Side (Opposite) ADA Drinking Fountain Right Side (Shown) (additional costs may be incurred) Freeze Resistant Valve, Two Valves1 Customer specified logo 1-1/4” OD P-Trap (Access Below Fixture) Concealed Sensor Operation Drinking Fountains - Battery Operated Standard 1 (N/A with -FRA2 ) Type 316 Stainless Steel Construction Option Notes: ¹See separate option sheet Complies with the following standards: Member of U.S. Green Building Council Federal Public Law 111-380 (No Lead) Recyclable Product Water Conserving Product WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com

CONTEMPORARY DRINKING FOUNTAINS * Valve specifications: Minimum/Maximum Pressure 30 to 100 psi. BARRIER FREE, WALL MOUNTED ANGLED BI-LEVEL DRINKING FOUNTAIN NOTES: 1. 1/4" THICK SS MOUNTING PLATE 2. REMOVABLE ACCESS PANELS 3. DRINKING BUBBLER 4. PUSHBUTTON WITH CARTRIDGE VALVE ASSEMBLY 5. 1-1/4" O.D. WASTE OUTLET FOR P-TRAP BEHIND WALL (STANDARD) P-TRAP PROVIDED BY OTHERS 6. 3/8" O.D. SUPPLY CONNECTION 7. INSTALLER PROVIDED WALL ANCHORS AND ANCHORING HARDWARE GENERAL NOTES: 1. ALL DIMENSIONS ARE IN INCHES [MM]. *2. DIMENSIONS SHOWN ARE FOR RECOMMENDED ADULT HEIGHT. ADJUST VERTICAL DIMENSIONS...