A172.8-UG-SOC
2Pages

WATER COOLER/BOTTLE FILLER A172.8-UG-SOC-BF Series CONCEALED SENSOR OPERATED, BARRIER-FREE, WALL MOUNTED UNIVERSAL BI-LEVEL WATER COOLER WITH BOTTLE FILLER STANDARD FEATURES Electric Water Cooler n Hands-Free Sensor with Easy Reach, Wave-on / Wave-off Operation n Sensor with maximum run time of 10 seconds or less n Apron and One-Piece Bottom Wrapper is Satin Finish Or Gray Powder Coat Finish n Flexible, Low Flow, Antimicrobial, Anti-Rotation, Non-Squirt Bubbler n Universal Bi-level Can Be Installed Left High Or Right High With No Additional Parts n Lead Free n Rough-Ins Match Other Manufacturer’s for Easy Replacement Bottle Filler n Hands-Free Sensor Operation n ADA Compliant n 100-Mesh Inlet Strainer n 120VAC/9.0VDC Plug-In Transformer, With -Bf12 Only n Laminar Flow Water Supply n 1 GPM Fill Rate n -BF12 Sensor Has a 20 Seconds Maximum Run Time Model A172108F-UG-SOC-BF12 Shown PATENT# D873,606 “RATED FOR INDOOR USE ONLY” SUGGESTED SPECIFICATIONS Model Number Rated Watts Full Load Amps Approx. Shipping Weight Electric Water Cooler Model A172108F-UG-SOC-BF is a self-contained, Bi-Level, Concealed Sensor Operated Water Cooler that delivers a minimum of 8.0 GPH (30.3 LPH) of water at 50°F (10°C) cooled from 80°F (26.7°C) inlet water and 90°F (32.2°C) ambient. Unit shall be activated by a 9 Volt Infrared Sensor concealed beneath basin skirt for wave-on and wave-off operation. Bubbler shall deliver a 0.3 GPM flow with maximum run time of 10 seconds. Provide Antimicrobial Flexible Guard with an integrally designed non-squirt feature and operate on a water pressure range of 20-105 PSIG. Basin shall be constructed from 304 Stainless Steel and have an Integral Drain. Cabinet shall be either Galvanized or Galvannealed Steel with Gray Powder Coat Finish or Stainless Steel with Satin Finish. Cooling system shall use R-134a Refrigerant and be Capillary Tube regulated. An Adjustable Thermostat with an off position shall regulate the refrigeration system. Unit shall be listed by Underwriters Laboratories for both the US and Canada and is compliant to the Air Conditioning and Refrigeration Institute Standard 1010. Unit conforms with ANSI A117.1, Public Law 111380 (NO-LEAD), CHSC 116875 and NSF/ANSI 61, Section 9. Fixture meets ADA, ADA Standing Person, and ADA Child requirements when mounted appropriately. Unit shall still deliver ambient water temperature to the Bubbler in the absence of electrical power as long as there is a pressurized water supply. Bottle Filler -BF12 Bottle Filling unit shall include Sensor Operated activation with a 20 second maximum run time. LED Lights illuminate the Bottle Fill area and brighten when a bottle is detected. Optional -BCD (Bottle Counter Display) indicates the quantity of 16 oz disposable Plastic Bottles saved from a land fill and also displays the Water Filter status. Bottle Filler housing construction will be 20 gauge Stainless Steel with a satin finish and will also include components manufactured from Antimicrobial, impact resistant ABS. Bottle Filler shall provide approximately 1 GPM flow rate with a Laminar Flow Spout to minimize splashing. Federal * GPH of 50°F water at 90°F ambient room temperature and 80°F inlet water temperature Compressor motor operates on 115 Volt / 60 Hz single phase. MODEL: (Must Specify Water Cooler) FLEXIBLE BUBBLER o A172108F-UG-SOC Gray Finish Cooler o A172408F-UG-SOC Satin Stainless Finish STAINLESS STEEL BUBBLER o A172108S-UG-SOC Gray Finish Cooler o A172408S-UG-SOC Satin Stainless Finish MUST SPECIFY BOTTLE FILLER: Satin Finish (only) o -BF12 o -BF12-BAT o -BF12-BCD WATER COOLER OPTIONS: (additional costs may apply) Test rating conditions are compliant with ARI 1010. Concealed Support Carrier Customer Specified Logo / Graphics Skirt Kit for upper unit 1500-Gallon Capacity, NSF 42+53, 1-Micron Lead Reduction Filter 3000-Gallon Capacity, NSF 42+53, 1-Micron Lead Reduction Filter 220 volt / 50 Hz or 60Hz Compressor Member of U.S. Green Building Council Complies with the following standards: Bottle Filler with Sensor Operation Bottle Filler with Battery Operated Sensor Operation Bottle Filler with Sensor Operation with Bottle Counter Display Recyclable Product Water Conserving Product WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com

WATER COOLER/BOTTLE FILLER 1 378" [943] A172.8-UG-SOC-BF Series CONCEALED SENSOR OPERATED, BARRIER-FREE, WALL MOUNTED UNIVERSAL BI-LEVEL WATER COOLER WITH BOTTLE FILLER A. BOTTLE FILLER SENSOR B. DRINKING FOUNTAIN CONCEALED SENSOR C. WALL ANCHORING OPTIONAL -BCD BOTTLE COUNTER, SHOWN 1-1/4" [32] O.D. TAILPIECE FOR P-TRAP BY OTHERS GENERAL NOTES: 1. ALL DIMENSIONS ARE IN INCHES [MM] 2. ALLOW 4 INCHES [102 MM] MINIMUM CLEARANCE PER SIDE FOR VENTILATION *3. DIMENSIONS SHOWN ARE FOR ADA ADULT HEIGHT. ADJUST VERTICAL DIMENSIONS AS NECESSARY TO COMPLY WITH FEDERAL, STATE, & LOCAL CODES 4. STOP...