A171-W
2Pages

WATER COOLERS HAND WASHING STATION EZ Wash-N-Go! HAND WASHING STATION BARRIER FREE, WALL MOUNTED MODEL A171100W SERIES STANDARD FEATURES n Designed to Match Existing Water Cooler Rough-ins for Retrofit and Replacement * n Child or Adult ADA Compliant (When Properly Installed) n Gray Powder Coated Apron And One-Piece Bottom Wrapper or Satin Finish Stainless Steel n Hands Free Sensor Operated Stainless Steel “J” Spout n 9V Battery Power or Plug-in Transformer n Durable Stainless Steel Spout Superior to Chrome Finish Patent Pending n Hanging Bracket Provided * Verify existing rough-ins - Does not apply to all existing units. SUGGESTED SPECIFICATIONS MODEL: (Must Specify) Wall mounted ADA Hand Washing Station shall be Murdock model A171100W series. Hand wash shall be activated by a Hands Free Sensor Operated Faucet with 0.5 GPM Laminar Flow outlet to minimize splash. Provide with 9 Volt DC battery power and Plug-in Transformer. Faucet Spout shall be constructed of type 304 stainless steel. Basin shall be constructed from 304 Stainless Steel and have an Integral Drain. Cabinet shall be either Galvanized or Galvannealed Steel with Gray Powder Coat Finish or Stainless Steel with Satin Finish. Unit to include a rear alcove Splash Guard manufactured from antimicrobial, impact resistant ABS. Pump Soap Dispenser shall allow for top refill of liquid and lotion soap and to include 4” stainless steel spout with bright polished finish and 34 ounce polyethylene Soap Container. Optional Tankless Water Heater shall be shipped loose for remote installation or within Cabinet. Hand Washing Station to comply with ANSI A117.1, Public Law 111-380 (NOLEAD), CHSC 116875. Fixture shall meet ADA, ADA Standing Person, and ADA Child requirements when mounted appropriately. Complies with the following standards: Gray Finish (Standard) Stainless Steel Finish Gray Finish with Pump Soap Dispenser Stainless Steel Finish with Pump Soap Dispenser o A171100W-SSO Gray Finish with Sensor Operated Soap Dispenser o A171400W-SSO Stainless Steel Finish with Sensor Operated Soap Dispenser (additional costs may be apply) Tankless Water Heater, 20 amp 240 volt ¹ Model # CM20L/240 104F-NPT08 Tankless Water Heater, 12 amp 120 volt ¹ Model # CM12L/120 104F-NPT08 Options Notes: ¹ For Information on Chronomite® Water Heaters Refer to website: www.Chronomite.com Member of U.S. Green Building Council Federal Public Law 111-380 (No Lead) Recyclable Product Water Conserving Product WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com

WATER COOLERS HAND WASHING STATION * Valve specifications: Minimum/Maximum Pressure 30 to 100 psi. HAND WASHING STATION MODEL A171100W SERIES BARRIER FREE, WALL MOUNTED FINISHED WALL SENSOR OPERATED SPOUT ** SHOWN WITH PUMP SOAP GENERAL NOTES: 1. ALL DIMENSIONS ARE IN INCHES [mm] 2. * DIMENSIONS SHOWN ARE FOR RECOMMENDED ADULT HEIGHT. ADJUST VERTICAL DIMENSIONS AS NECESSARY TO COMPLY WITH FEDERAL, STATE & LOCAL CODES. 3. P-TRAP AND INLET STOP NOT PROVIDED. 4. ** DISTANCE FROM NOZZLE TO BASIN IS 6-1/2" [165]. SELECTION SUMMARY & APPROVAL FOR MANUFACTURING Murdock Mfg.™ warrants that its...