A132.8-VR Series
2Pages

ELECTRIC DRINKING FOUNTAIN A132.8-VR Series MODEL A132408S-VR BARRIER FREE, VANDAL RESISTANT, BI-LEVEL, WALL MOUNTED CHILLED DRINKING FOUNTAIN WITH 32” TRIM PANEL STANDARD FEATURES n Child Or Adult Ada Compliant (When Properly Installed) n 18 Gauge, 304 Stainless Steel Basin And Flush Mounted Chrome Plated Brass Button n Polished Stainless Steel, Vandal Resistant, Anti-rotation, Non-squirt Bubbler n 100-mesh Inlet Strainer n Vandal Resistant Screws n Integral P-Trap n Mounting Frame n 32 Inch Trim Panel And Louvered Grille Model A132408S-VR Shown ** U.S. DESIGN PATENT D545,607(Bowl Design) SUGGESTED SPECIFICATIONS Model A132408S-VR is a Vandal Resistant, Wall Mounted, Bi-Level pressure Chilled Drinking Fountain that shall deliver a minimum of 8.0 GPH (30.3 LPH) of water at 50°F (10°C) cooled from 80°F (26.7°C) inlet water and 90°F (32.2°C) ambient. Unit shall be made from 18 gauge, 304 stainless steel with a brushed finish. Unit shall be activated by Chrome Plated Brass Pushbutton using less than 5 pounds of force. Cooling system shall use R-134a refrigerant and be capillary tube regulated. Cooling system shall use R-134a refrigerant and be capillary tube regulated. An adjustable thermostat with an off position shall regulate the refrigeration system. Bubblers shall be polished stainless steel with nonsquirt features and operate on a water pressure range of 20105 psig. Unit shall have uniquely designed, two-piece contoured bowls with P-Traps integral to the unit. Unit shall be listed by Underwriters Laboratories for both the US and Canada and is compliant to the Air Conditioning and Refrigeration Institute Standard 1010. Unit is certified to ANSI A117.1, Public Law 111-380 (NO-LEAD), CHSC 116875 and NSF/ANSI 61, Section 9. Fixture meets ADA, ADA Standing Person, and ADA Child requirements when mounted appropriately. Model Number Rated Watts Full Load Amps (Must Specify) FLEXIBLE BUBBLER (LOW FLOW) Bronze Finish Gold Finish (High Polish) Satin stainless Finish LEAD-FREE STAINLESS STEEL BUBBLER Bronze Finish Gold Finish (High Polish) Satin stainless Finish (Shown) (additional costs may be incurred) Approx. Shipping Weight High polished stainless steel Reverse bi-level Skirt kit, stainless steel, for upper unit 1500 gallon capacity, NSF 42+53, 1 micron lead reduction filter 3000 gallon capacity, NSF 42+53, 1 micron lead reduction filter 220 volt / 50 Hz compressor ( ) *GPH of 50°F water at 90°F ambient room temperature and 80°F inlet water temperature. Compressor motor operates on 115 Volt / 60 Hz single phase. Complies with the following standards: Member of U.S. Green Building Council Recyclable Product Water Conserving Product Federal Public Law 111-380 (No Lead) WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com

ELECTRIC DRINKING FOUNTAIN A132.8-VR Series MODEL A132408S-VR BARRIER FREE, VANDAL RESISTANT, BI-LEVEL, WALL MOUNTED CHILLED DRINKING FOUNTAIN WITH 32” TRIM PANEL 97" 8 [250] GENERAL NOTES: 1. ALL DIMENSIONS ARE IN INCHES [MM]. *2. DIMENSIONS SHOWN ARE FOR RECOMMENDED ADULT HEIGHT. ADJUST VERTICAL DIMENSIONS AS NECESSARY TO COMPLY WITH FEDERAL, STATE, & LOCAL CODES. 3. WATER LINES FROM CHILLER TO FOUNDATION SHOULD BE COVERED WITH SPONGE FOAM RUBBER OR ICE WATER TYPE INSULATION OF ADEQUATE THICKNESS. SELECTION SUMMARY & APPROVAL FOR MANUFACTURING Murdock Mfg.™ warrants that its products are...