
A blend of classic design and modern technology LIGHT WITH STYLE: MS LUX AMBIENT LIGHTING The high-tech product with built-in optical technology is designed for a variety of applications on public roads, including bicycle paths and roadways. This outstanding adaptability is achieved through three different structural sizes, designated as SX, MX, and LX, each providing different luminous fluxes and multiple light distribution options. M SAN Grupa d.o.o., Dugoselska ulica 5, 10372 Rugvica, HR www.mslux.eu
Open the catalog to page 1URBAN LX Light characteristics Certificates, Standards Luminous flux Luminous efficacy Colour rendering index (CRI) Protective cover Glass thickness LED lifetime L90B10 SDCM (McAdam) UV radiation Warm-up time Lens type 12300 -271001m Flat tempered glass 5mm Individual asymmetric Resistance to water and dust IP 66 Salt mist certificate Yes Possibility of extending warranty Yes Electrical characteristics Control Input voltage 220-240V AC Autonomous control AstroDim Operating frequency 50-60Hz Luminous flux control DALI-2 Power factor > 0.95 Control range 10-100% Electrical protection class Class...
Open the catalog to page 2URBAN LXOther characteristics Model Lamp fitting power Luminous flux Efficacy CCT CRI Width Length (mm) Height Base diameter (mm) Mass (kg) Data subject to change. Last modified: 12-Oct-2023
Open the catalog to page 3URBAN LX Connecting and disconnecting of the lamp fitting and all its parts MUST be done in a voltage-free state. 1. The lamp fitting power cord comes out of the lamp fitting door, where: c. Grounding (GND) - yellow green 2. Bring the LV mains connection cable to the lamp fitting door. If an additional bracket (arm) is used, run the cable through the bracket (arm). The lamp fitting is connected directly to the mains with the included 3x1mm2 cable (rubber) or via the WAGO 294-5013 connector. The cable is connected to the network, made with a self-supporting cable bundle, to a single phase (one...
Open the catalog to page 4Optimal mounting height (m) Model LX Data subject to change. Last modified: 12-Oct-2023
Open the catalog to page 5TYPICAL LIGHT DISTRIBUTION L01 Data subject to change. Last modified: 12-Oct-2023
Open the catalog to page 6Lamp fitting maintenance The lamp fitting is modular so that in the event of malfunction of individual parts, the replacement can be done without dismantling the entire lamp fitting from the mast or bracket (arm). For this purpose, the lamp fitting is designed in such a way that it is possible to open the housing without using tools. If maintenance is carried out without dismantling, the lamp fitting must not be opened during bad weather to avoid condensation of moisture inside the lamp fitting. Before closing the protective cover, the interior of the lamp fitting should be wiped with a dry soft...
Open the catalog to page 7Data subject to change. Last modified: 12-Oct-2023
Open the catalog to page 8A blend of classic design and modern technology M SAN Grupa d.o.o., Dugoselska ulica 5, 10372 Rugvica, HR www.mslux.eu
Open the catalog to page 9