
Road lighting, LED lighting A large light aperture ensures better uniformity of lighting – High power factor (PF) – High electrical efficiency of the rectifier – Tempered glass diffuser – Option for mounting on horizontal or vertical brackets – Adjustable tilt of the luminaire ± 15° – Tool-free opening of the luminaire (Tool-free option) – Easy maintenance of the luminaire through body or electronics replacement – Power-off protection when opening (Power off protection) – Modular design with interchangeable rectifier, LED module, and surge protection – Additional surge protection up to 10 kV (options for 15 kV, 20 kV) – Protection against dust and water ingress IP66 – Mechanical impact protection rating IK10 – High luminous efficiency of the
Open the catalog to page 1City L Light Data Certificates, Standards Mech. Impact protection code IK10 Ingress protection code IP66 Salt mist certificate Yes Colour rendering index (CRI) > 70, (80 option) Protective cover Flat tempered glass ULOR 0% (full cutoff) Lens type Individual asymmetric Electrical Data Electrical protection class Class I, Class II Overvoltage protection (kV) 10 kV / 10 kA options 15 kV, 20 kV Zhaga connector for controller Yes (according to Zhaga Book 18) Zhaga connector for sensors Yes (according to Zhaga Book 18)_ 5-point autonomous control Yes, AstroDim Dimming control DALI-2, D4i, Time Wireless...
Open the catalog to page 2City LOther Data Model Power Luminous flux * Luminous efficacy * CCT CRI * The results depend on the type of optics (3000K) Data subject to change. Last modified: 22.10.2025. Due to component tolerances declared by manufacturers, the specified values may differ from the actual values of the specific product by ±8% in luminous flux, ±10% in power consumption, ±3% in CRI, and ±7% in correlated colour temperature (CCT).
Open the catalog to page 3City LDimensionsModel Width (mm) Length (mm) Height (mm) City L 301 768 103 * With additional adapter, compatible with 040-80 mm Data subject to change. Last modified: 22.10.2025. Due to component tolerances declared by manufacturers, the specified values may differ from the actual values of the specific product by ±8% in luminous flux, ±10% in power consumption, ±3% in CRI, and ±7% in correlated colour temperature (CCT).
Open the catalog to page 4City LDimensions (without bracket)Model Width (mm) Length (mm) Height (mm) 0 Pole (mm) Weight (kg)City L 301 623 103 048, 060, 0761 7,4 M SAN Grupa d.o.o. Data subject to change. Last modified: 22.10.2025. Due to component tolerances declared by manufacturers, the specified values may differ from the actual values of the specific product by ±8% in luminous flux, ±10% in power consumption, ±3% in CRI, and ±7% in correlated colour temperature (CCT). With additional adapter, compatible with 040-80 mm
Open the catalog to page 5City L Connecting and disconnecting the lamp and all its parts MUST be done in a de-energized state. The power supply cable exits through the luminaire neck, with the following wiring: • L – brown – phase conductor • N – blue – neutral conductor • Earth (PE) – yellow-green Bring the low-voltage network supply cable to the luminaire neck. If an additional bracket (arm) is used, route the cable through the bracket (arm). The luminaire is connected directly to the mains using the supplied 3x1 mm² rubber cable or via WAGO 294-5013 connector. Use terminal blocks to properly connect the phase conductor...
Open the catalog to page 6City L Optimal mounting height (m) City L Data subject to change. Last modified: 22.10.2025. Due to component tolerances declared by manufacturers, the specified values may differ from the actual values of the specific product by ±8% in luminous flux, ±10% in power consumption, ±3% in CRI, and ±7% in correlated colour temperature (CC
Open the catalog to page 7City L TYPICAL LIGHT DISTRIBUTIONS L38 Data subject to change. Last modified: 22.10.2025. Due to component tolerances declared by manufacturers, the specified values may differ from the actual values of the specific product by ±8% in luminous flux, ±10% in power consumption, ±3% in CRI, and ±7% in correlated colour temperature (CCT)
Open the catalog to page 8City L Luminaire Maintenance The luminaire is designed in a modular way, allowing individual components to be replaced without dismounting the entire luminaire from the pole or bracket in case of malfunction. To facilitate this, the luminaire housing can be opened without the use of tools. If maintenance is performed without dismounting the luminaire, it must not be opened during adverse weather conditions in order to prevent moisture condensation inside the unit. Before closing the protective cover, the interior of the luminaire should be wiped with a dry, soft cloth. The condition of the protective...
Open the catalog to page 9M SAN Grupa d.o.o., Dugoselska ulica 5,10372 Rugvica, HR www.mslux.eu [email protected]
Open the catalog to page 10