AIR CURTAINSOVERVIEW CHARACTERISTICS XLF SERIES Overview The door air curtain XLF allows the effective separation of two adjacent areas with different climatic conditions, typically: interior and exterior environments of the tertiary sector. It is particularly suitable for installation in shopping centers, banks, hotels, office buildings, conference rooms, restaurants, etc.. T echnical charatteristics Maximum installation height from 4 up to 5 m Available lengths1.0, 1.5, 2.0 2.5 m Color white RAL 9010 Versions with hating coil electrica or by water Regulation of the air flow:3 speeds SM version manual control 2 level electrical resistance control door opening contact connection DM version wireless connection manual control one external control control electrical resistance at two levels control water coil on / off + valve ZV3 connection with contact of opening doors connectable to the room thermostat off delay door closing DA version manual / automatic control more external controls control electrical resistance at three levels control water coil mixing + valve MV3 connection contact opening doors internal and external temperature sensors * indicative value, valid only in the absence of transverse currents of air through the door

OVERVIEW CHARACTERISTICS Value refers to the maximum range of the fans, the maximum power of the heater and air inlet temperature 18 ° C

AIR CURTAINS CONTROL SYSTEMS

AIR CURTAINS WATER HEATING XLF SERIES Water exchanger parameters for water temperature gradient of 90/70 °C Temperature of intake air: +18 °C 1 KPa = 102 mm water column

DK-1, Door contact for barriers with control DM DS, Door contact for barriers with control SM - RF TER-P, Room thermostat SH-TM-848, Timer with a weekly program Wall mounting bracket Bracket designed for mounting the air curtain to the wall. 1 Bracket 2 Hanging strip 3 Securing screw VCS4-KONZ-STR set for B and C air curtains (2 pcs.) wall mounting bracket Ceiling holder The holder is designed for attaching the air curtain to a ceiling 1 Ceiling bracket 2 2 Hanging strip 3 3 Securing screw VCS4-KONZ-STR set for B and C air curtains (2 pcs.) ceiling holder

Valve V135-3 / 4B with capillary The thermostatic valve V135-3 / 4B regulates the flow diverting water to the coil or to the return circuit in the boiler, depending on the temperature detected from the capillary outlet of the coil. The housing of the valve capillary is located after the water coil. Necessary to install a valve for each curtain ZV3 Valve with servo motor The three-way valve ZV3 with actuator receives the signal from the room thermostat TER-P; the valve channels water to the coil or to the return circuit in the boiler in function of ambient temperature. Necessary to install a valve...