WALL-MOUNTED HELICAL FANS OVERVIEW OVERVIEW: The XE series of ventilation units are suitable for ventilation and can be mounted on the walls or panels in industrial buildings, barns, hothouses, garages, gyms, parking garages, etc.The series includes two versions, the XE-PM-M e XE-PM-T depending on the motor (single or three-phase) with 300 to 710 mm diameter impeller. The XE series is designed for use with clean air at a temperature of 50 C. The low noise emissions and high performance are due to the intake opening that facilitates taking air in. The acoustic pressure was measured in an open field, 3 metres from the centre of the fan in each direction, with free intake and delivery. TECHNICAL CHARACTERISTICS: - Supporting frame in drawn steel sheet with wide inlet cone. Protected against atmospheric agents by epoxy paint. - Impeller with wing profile blades in plastic material, and hub in die-cast aluminium alloy. - Adjustable pitch angle in still position. - Execution 5 (with impeller direct coupled on the shaft end). - Air flow from motor to fan. - Motor side protection guard, in drawn steel rod protected against atmospheric agents. Manufactured in accordance to UNI9219-DIN31001 standard. MOTORIZATIONS: XZE asychronous motor - three-phase (400V-50Hz mod.VE-T) or single-phase (230V-50Hz mod. VE-M) according to IEC34-IEC72 international standards and 89/392 EEC-89/336 EEC-73/23 EEC European standards, marked CE. ACCESSORIES: Gravity damper: protected against the atmospheric agents. Spacer: manufactured in metal sheet, protected against the atmospheric agents. Impeller side protection guard: manufactured according to UNI9219-DIN31001 standards and protected against the atmospheric agents. CONSTRUCTION DIMENSIONS

WALL-MOUNTED HELICAL FANS PERFORMANCE