Air curtain barrier
42Pages

BASIC AIR CURTAINS OVERVIEW CHARACTERISTICS XLA-C SERIES OVERVIEW: For many applications, such as in shops with large numbers of clients coming in and out, a traditional entrance door may act as a psychological barrier to customers that shop owners would obviously like to avoid (typical examples are: large department stores, supermarkets, bars, restaurants and boutiques). One solution is automatic doors, but these create other difficulties. In fact, each time the door opens (due to someone simply passing along the pavement), the outside air comes into the shop, causing discomfort, and sometimes even illnesses for personnel and customers, as well as increasing energy consumption by air-conditioning systems. The XLA-C series of air-curtains resolve all these problems simultaneously - the customer is induced to enter, the thermo hygrometric conditions of the air remain constant and energy consumption is does not increase. In fact, consumption may drop as these barriers generate an air ring that reduces stratification (Bernoulli effect). This draws the air from the hotter areas in the room and provides a p g uniform temperature throughout. XLA-C air curtains also prevent dust, exhaust fumes, smells, and insects from entering the room. XLA-C air-curtains can even be used within the same building, to separate areas with different climate conditions. For example, heated areas from warehouses without heating. Control buttons with speed selection On/Off infra-red remote control

XLA-C SERIES OVERVIEW CHARACTERISTICS CHARACTERISTICS: The unit, painted RAL9016, is installed above the entrance door, using normal expansion anchors. The room air is drawn in by the fan, passed through the grille on the front and is ejected downwards. The continuous flow of air forms an invisible "curtain" that travels all the way to the floor. The fins on the air outlet can be adjusted. The unit has a 2-speed fan, with a selector switch on the unit itself and a practical remote control is also supplied. The curtian must cover at least the full width of the doorway for which it is...

AIR CURTAINS OVERVIEW CHARACTERISTICS Overview The door air curtain XLF allows the effective separation of two adjacent areas with different climatic conditions, typically: interior and exterior environments of the tertiary sector. It is particularly suitable for installation in shopping centers, banks, hotels, office buildings, conference rooms, restaurants, etc.. Technical charatteristics Maximum installation height from 4 up to 5 m Available lengths1.0, 1.5, 2.0 2.5 m Color white RAL 9010 Versions with hating coil electrica or by water Regulation of the air flow:3 speeds SM version...

AIR CURTAINS OVERVIEW CHARACTERISTICS

CONTROL SYSTEMS Main available functions Connection to the air curtin Manual / Automatic Setting of the air flow Regolazione electrical heating Regolazione water heating Commection of more air curtins indication of the function signal maintenance interval Possibility of adjustment based on external signals shutdown at closing door External On/Off contact ll h Control of electric heating with signal of heating thermostat Control of water heating with signal of heating thermostat synchronization fans speed with switch closing door Control with MODBUS RTU Signaling functioning barrier to an...

AIR CURTAINS WATER HEATING

DK-1, Door contact for barriers with control DM DS, Door contact for barriers with control SM - RF TER-P, Room thermostat SH-TM-848, Timer with a weekly program Wall mounting bracket Bracket designed for mounting the air curtain to the wall. 1 Bracket 2 Hanging strip 3 Securing screw VCS4-KONZ-STR set for B and C air curtains (2 pcs.) wall mounting bracket Ceiling holder The holder is designed for attaching the air curtain to a ceiling 1 Ceiling bracket 2 2 Hanging strip 3 3 Securing screw VCS4-KONZ-STR set for B and C air curtains (2 pcs.) ceiling holder

Valve V135-3 / 4B with capillary The thermostatic valve V135-3 / 4B regulates the flow diverting water to the coil or to the return circuit in the boiler, depending on the temperature detected from the capillary outlet of the coil. The housing of the valve capillary is located after the water coil. Necessary to install a valve for each curtain ZV3 Valve with servo motor The three-way valve ZV3 with actuator receives the signal from the room thermostat TER-P; the valve channels water to the coil or to the return circuit in the boiler in function of ambient temperature. Necessary to install a...

OVERVIEW CHARACTERISTICS BASIC FEATURES Lengths: 1; 1.5 and 2 m Air flow up to 4700 m3/h Straw System – maximized screening effect Universal interface for control module connection (RF, SM, DM) FACE 2 in 1 – suction grille + filter = 2 in 1 Low build-in height Standard colour RAL 9010 (any RAL – based colours may be provided on customer’s request) XLG-A Basic air curtain for use in small shops, restaurants and coffee bars with a recommended installation height up to 2,2 m XLG-B Basic air curtain for use in shops, restaurants, hotels and offices with a recommended installation height up to 3...

AIR CURTAINS FOR CIVIL USE OVERVIEW CHARACTERISTICS Mounting brackets Top cover Area for connecting the regulation module Suction cover Connection for water heat exchanger (water versions) Side cover (attached magnetically) INSTALLATION AND ASSEMBLY The air curtain shall be installed in a horizontal position only. The air curtain shall be located as close as possible to the top edge of the doorway, minimal distance from the walls depending on fire safety and standards in the country, our recommendation see figure. To ensure a correct function it is recommended that the air curtain overlaps...

OVERVIEW CHARACTERISTICS Maximum recommended installation height suitable for most applications (may differ based on the existing conditions at the installation location) ** Sound pressure measured at 3 and 5 m away from the device *** Suction air temperature +18°C, at maximum heating level (90/70) and highest fan speed. **** Weight without regulation.