Wire Mesh Cable Tray
32Pages

RE BASKET CABLE TRAYS

Cable Tray Systems Engineered to Support Powerful Reputations MP Husky was founded in 1952 and originally began operations as Husky Products. Over the following 50+ years of leadership and service, MP Husky has gone through several transformations and mergers, including Husky/Burndy and Metal Products, thus leading to what is today MP Husky—America’s leading manufacturer of Cable Tray and Cable Bus Power Distribution Systems. Throughout these changes, one thing has remained constant—the “Husky” drive to be the most reliable, highest quality, cost effective and innovative manufacturer of...

Wire Basket Cable Trays

Electroplated Zinc Wire Basket Shipped with pre-attached splice plates, the BF2R Series offers a distinct advantage for installers. This system is designed for tool-less, quick installation. The BF2R Series is UL Classified for use as an equipment ground conductor. No additional splice plates or bonding jumpers are required with pre-attached splice plates. To avoid damage to cables or personnel, all MP Husky Wire Basket Cable Tray is manufactured with a safety edge. CABLE CAPACITY (in2) Width (in) 2

Electroplated Zinc 2” DEEP, BF2R SELF COUPLING SYSTEM Center Splices 2” Deep, 4” Wide 2” Deep, 6” Wide 1.) BF2R available in electroplated zinc only. 2.) Splice plates come pre-installed on tray. *Safe Working Load (SWL) based on 8 ft (2.43 m) span with a 1.5 safety factor. 4” DEEP, BF2R SELF COUPLING SYSTEM Width, B (in) Center Splices 4” Deep, 8” Wide 4” Deep, 12” Wide 1.) BF2R available in electroplated zinc only. 2.) Splice plates come pre-installed on tray. *Safe Working Load (SWL) based on 8 ft (2.43 m) span with a 1.5 safety factor. 6” DEEP, BFR SYSTEM Width, B (in) Center Splices...

HDGAF/Stainless Steel Wire Basket The HDGAF BFR Series was designed to offer both optimal design and finish. MP Husky ensures that all HDGAF coatings are smooth and free of sharp edges that could cause harm to cables or installers. The Stainless Steel BFR Series was designed to offer both optimal design and finish. To avoid damage to cables or personnel, all MP Husky Wire Basket Cable Tray is manufactured with a safety edge. CABLE CAPACITY (in2) Width (in) 2

HDGAF/Stainless Steel 2” DEEP, BFR SYSTEM Width, B (in) Center Splices Required (*) 2” Deep, 2” Wide 2” Deep, 4” Wide 1.) To splice trays together, 2 Lateral Union Sets are required plus applicable number of Bolt-Staple Sets (*). 2.) 316 Stainless Steel available upon request. *Safe Working Load (SWL) based on 8 ft (2.43m) span with a 1.5 safety factor. 4” DEEP, BFR SYSTEM Width, Center Splices 1.) To splice trays together, 2 Lateral Union Sets are required plus applicable number of Bolt-Staple Sets (*). 2.) 316 Stainless Steel available upon request. *Safe Working Load (SWL) based on 8 ft...

Fasteners & Accessories DIVIDERS Description 1.) Separators are secured to wire basket using a Staple and a B1 Bolt at 4 different locations. 2.) The following hardware is provided with Dividers: a.) 4 B1 Bolts b.) 4 Staples c.) 1 Separator Splice 3.) 316 Stainless Steel available upon request. QUICK SPLICE HDGAF Part No. Quick Splice Connector 1.) Quick connector for 2” deep and 4” deep wire basket. 2.) No hardware is required to secure quick connector to tray. 3.) Quick Splices are shipped in quantities of 50. 1.) Bolt-Staple Set inlcudes Bolt-Nut Set and Staple. 1/4” 2.) Bolt-Staple Sets...

Fasteners & Accessories Wire Basket 1.) Bolt-Nut Set consists of a bolt and a nut. 2.) Bolt-Nut Sets are shipped in quantities of 100. 13/16” 1.) Combined with B1 Bolt to mount separators to wire basket. 2.) Staples shipped in quantities of 100. 3.) 316 Stainless Steel available upon request. SSC HOLD DOWN EZ Part No. Hold Down 1.) Combined with 1 Bolt-Nut Set, 2 SSC Hold Downs can be used to create a adjustable horiztonal fitting or small radius fitting. 2.) Combined with threaded rod and nuts, 2 SSC Hold Downs can be used as a center hanger support for 4”,6”, and 8” widths. 3.) Combined...

Fasteners & Accessories DROP-OUT PLATE PG Part No. Drop-Out Plate 1.) No hardware is required to secure Drop-Out Plate to wire basket. 3 5/7" (94) SMALL DROP-OUT PLATE Description Small Drop-Out Plate 1.) No hardware is required to secure Small Drop-Out Plate to wire basket. MULTI-UNION JOINT HDG Part No. MULTI-UNION-HDG 2.) Secured to wire basket using Bolt-Staple Sets. 1.) Multi purpose bracket used to field fabricate fittings. Description Multi-Union Joint 3.) Multi-Union Joints are shipped in quantities of 10. CONDUIT CLAMP 2.) Conduit Clamp accomodates 1/2” to 2” U-bolts. 1.) Conduit...

Fasteners & Accessories Wire Basket COVERS Description Self Weight (lbs/ud) Self Weight (lbs/ud) 1.) Covers secured to wire basket using 4 Cover Clips. 2.) Cover Clips secured to wire basket using bendable tabs. No hardware required. SOLID BOTTOM INSERTS Description Solid Bottom Insert, 4” Wide Solid Bottom Insert, 6” Wide Solid Bottom Insert, 8” Wide Solid Bottom Insert, 12” Wide Solid Bottom Insert, 16” Wide Solid Bottom Insert, 18” Wide Solid Bottom Insert, 20” Wide Solid Bottom Insert, 24” Wide Solid Bottom Insert, 36” Wide 1.) Solid Bottom Inserts are secured to wire basket using an...

Fasteners & Accessories WALL SUPPORT 7-7/8” Wall Support 1.) Attached to wire basket using 2 Bolt-Staple Sets. ADJUSTABLE SPLICES Description Adjustable Splices 1.) Used for field fabrication of fittings. Splices are adjustable to allow for more flexibility. 2.) Adjustable Splices are shipped in quantities of 100. SIDE HANGER CLIP PG Part No. SU-T-PG Side Hanger Clip 2.) Side Hanger Clips are shipped in quantities of 25. 1.) Acceptable for use on wire basket widths 8” and smaller. 7/1 1.) REERs can be used as end plates or reducers. 2.) 2 Bolt-Staple Sets are required to attach REERs to...