LED4W700iP-01

Product catalog summary

Ordering Information
Date, Quantity, Project, Note, and Type fields are provided for order customization. The product code is LED4W700iP-01 with a B driver enclosure.

Important Notes
MP Lighting reserves the right to make product improvements without notice. Installation must follow MP Lighting's instructions to maintain warranty validity. Specifically, do not install an on-off switch on the output side of a constant current LED driver.

Specifications
The LED4W700iP-01 is a constant current LED driver with 4W, 700mA, and ELV dimmable features. It operates on a 120V AC input and is suitable for damp and dry locations (UL Class2).

Dimensions
The driver dimensions are 2-1/2” x 1” x 3/4”, and with the enclosure, it measures 6-1/4” x 5-1/8” x 2”.

Performance
Input voltage is 120V AC with an output voltage of 2.5~6V DC. It has a power factor of 0.9 minimum and typical efficiency of 80%. The driver supports ELV dimming with a range of 10% to 100%.

Recommended Load
Typically used for 2W LED fixtures. The driver supports both dimming and non-dimming systems with a minimum and maximum load of 1 fixture.

Application
Approved for damp and dry locations with an ambient temperature range of -30°C to 80°C. The driver includes short circuit, overload, and over-voltage protection. It weighs 150g and is made of metal.

Wiring Diagram
Illustrates wiring for dimming and non-dimming setups with 700mA LED lighting fixtures wired in series.

Catalog excerpts

LED4W700iP-01 CONSTANT CURRENT 4W, 700mA, ELV dimmable, 120V AC Input Damp and Dry location (UL Class2) Ordering Information Clear Form Specifications LED Driver | Example Code: LED4W700iP-01-B Product Important Notes Warranty Notes & Disclaimer MP Lighting reserves the right, at its sole discretion, at any time and without notice, to make improvements and innovations to any of our products. Consult MP Lighting website for further details. 1. Do not install on-off switch at the output (load) side of a constant current LED driver as it will damage the fixture(s) and will void the warranty on both driver and fixture(s). 2. Fixtures must be wired as per MP Lighting's instruction (series wiring for constant current driver and parallel wiring for constant voltage drivers.) Failures due to improper installation will void warranty. Dimensions Driver Driver with Enclosure (EBX-160-ZP) MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184

Open the catalog to page 1

LED4W700iP-01 CONSTANT CURRENT 4W, 700mA, ELV dimmable, 120V AC Input Damp and Dry location (UL Class2) Performance Input Power Factor: 0.9 minimum. Controls Dimming Protocols ELV dimmable. Can be used in both dimming & non-dimming systems. Dimming Range Recommended Load Driver Load Typically used for 2W LED fixtures with the load below: Systems Input Voltage System Dimming Option Application Environments Damp and Dry Location approved. Ambient Temperature Case Temperature Driver Protection Short Circuit, Overload & Over-voltage protection. Case Material MP Lighting © | www.mplighting.com | [email protected]...

Open the catalog to page 2

Wiring Diagram Dimming | For use with 1 x 2W LED lighting fixtures (700mA), wired in series Dimmable Driver Dimmable Driver 700mA LED Lighting Fixture 700mA LED Lighting Fixture Non-Dimming | For use with 1 x 2W LED lighting fixtures (700mA), wired in series 1 ELV Dimmer Dimmable Driver Dimmable Driver 700mA LED Lighting Fixture 700mA LED Lighting Fixture MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184

Open the catalog to page 3

All MP Design Inc. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list