LED18W350iZ-01

Product catalog summary

Ordering Information
This section provides fields for specifying the date, quantity, project, note, and type for ordering the LED18W350iZ-01 product with a B driver enclosure.

Important Notes
MP Lighting reserves the right to make product improvements without notice. It is crucial not to install an on-off switch on the output side of a constant current LED driver to avoid damage and warranty voidance. Fixtures must be wired according to MP Lighting's instructions to maintain warranty validity.

Specifications
The LED18W350iZ-01 is a constant current LED driver with 18W, 350mA, and 0-10V dimmable capabilities, suitable for 120~277V AC input. It is approved for damp and dry locations (UL Class2). Dimensions for the driver and driver with enclosure are provided.

Performance
The driver operates with an input voltage of 120~277V AC and a current of 350mA. It has a power factor of at least 0.9 and typical efficiency of 80%. The dimming range is 10% to 100%, and it supports both dimming and non-dimming systems.

Recommended Load
The driver is typically used for 1W LED fixtures, supporting 1 to 12 fixtures in both dimming and non-dimming configurations across 120V and 120~277V inputs.

Application
The driver is suitable for damp and dry locations, with an ambient temperature minimum of -20°C and a case temperature maximum of 80°C. It includes short circuit, overload, and over-voltage protection. The driver weighs 140g and is made of plastic.

Wiring Diagram
Diagrams are provided for both dimmable and non-dimmable configurations, illustrating the wiring for 1-12 x 1W LED lighting fixtures (350mA) in series.

Catalog excerpts

LED18W350iZ-01 CONSTANT CURRENT 18W, 350mA, 0-10V dimmable, 120~277V AC Input Damp and Dry location (UL Class2) Ordering Information Clear Form Specifications LED Driver | Example Code: LED18W350iZ-01-B Product Important Notes 1-1/4” 1-5/8” 32mm 42mm MP Lighting reserves the right, at its sole discretion, at any time and without notice, to make improvements and innovations to any of our products. Consult MP Lighting website for further details. 3-1/2” 90mm 1. Do not install on-off switch at the output (load) side of a constant current LED driver as it will damage the fixture(s) and will void the warranty on both driver and fixture(s). 2. Fixtures must be wired as per MP Lighting's instruction (series wiring for constant current driver and 1” parallel wiring for constant voltage drivers.) Failures due to improper installation will void warranty. 25mm Warranty Notes & Disclaimer Dimensions Driver Driver with Enclosure (EBX-160-ZP) MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184

Open the catalog to page 1

LED18W350iZ-01 CONSTANT CURRENT 18W, 350mA, 0-10V dimmable, 120V AC Input Damp and Dry location (UL Class2) Performance Input Power Factor: 0.9 minimum. Controls Dimming Protocols 0-10V dimmable. Can be used in both dimming & non-dimming systems. Dimming Range Recommended Load Driver Load Typically used for 1W LED fixtures with the load below: Systems Input Voltage System Dimming Option Application Environments Damp and Dry Location approved. Ambient Temperature Case Temperature Driver Protection Short Circuit, Overload & Over-voltage protection. Case Material MP Lighting © | www.mplighting.com...

Open the catalog to page 2

Wiring Diagram Dimming | For use with 1-12 x 1W LED lighting fixtures (350mA), wired in series Dimmable Driver NEU ~ VAC 350mA LED Lighting Fixture Dimmable Driver 0-10V Dimming 350mA LED Lighting Fixture Maximum Non-Dimming | For use with 1-12 x 1W LED lighting fixtures (350mA), wired in series 1 Non-Dimmable Driver NEU ~ VAC 350mA LED Lighting Fixture Non-Dimmable Driver 0-10V Dimming MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184

Open the catalog to page 3

All MP Design Inc. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list