LED15W350iP-01
3Pages

LED15W350iP-01 CONSTANT CURRENT 15W, 350mA, MLV dimmable, 120V AC Input Damp and Dry location (UL Class2) Ordering Information Clear Form Specifications LED Driver | Example Code: LED15W350iP-01-B Product Important Notes Warranty Notes & Disclaimer MP Lighting reserves the right, at its sole discretion, at any time and without notice, to make improvements and innovations to any of our products. Consult MP Lighting website for further details. 1. Do not install on-off switch at the output (load) side of a constant current LED driver as it will damage the fixture(s) and will void the warranty on both driver and fixture(s). 7/8” 2. Fixtures must be wired as per MP Lighting's instruction (series wiring for constant current driver and 23mm parallel wiring for constant voltage drivers.) Failures due to improper installation will void warranty. Dimensions Driver Driver with Enclosure (EBX-160-ZP) 3-11/16” 94mm MP Lighting © | www.mplighting.com | info@mplighting.com | 604.708.1184

LED15W350iP-01 CONSTANT CURRENT 15W, 350mA, MLV dimmable, 120V AC Input Damp and Dry location (UL Class2) Performance Input Power Factor: 0.95 minimum. Controls Dimming Protocols MLV dimmable. Can be used in both dimming & non-dimming systems. Dimming Range Recommended Load Driver Load Typically used for 13W LED fixtures with the load below: Systems Input Voltage System Dimming Option Application Environments Damp and Dry Location approved. Ambient Temperature Case Temperature Driver Protection Short Circuit, Overload & Over-voltage protection. Case Material MP Lighting © |...

Wiring Diagram Dimming | For use with 1 x 13 Watt LED lighting fixtures (350mA), wired in series Dimmable Driver MLV 350mA LED Lighting Fixture Dimming Non-Dimming | For use with 1 x 13 Watt LED lighting fixtures (350mA), wired in series NEU ~ VAC Dimmable Driver MLV 350mA LED Lighting Fixture Dimming MP Lighting © | www.mplighting.com | info@mplighting.com | 604.708.1184