Produktdatenblatt_DE_ENG_122022
12Pages

Ceiling elements Mosser Leimholz GmbH, A-3263 Randegg +43 7487 62 71-0, office@mosser.at

The following certificates demonstrate the outstanding quality of our products: Mosser Leimholz GmbH, A-3263 Randegg +43 7487 62 71-0, office@mosser.at

Ceiling elements visual quality Type of wood according to EN 14080:2013 and EN 302/301 melamine/urea resin, Type 1, 90°C-B Service class 1, 2 and 3* as per EN 1995-1-1 Width: 600 mm and 1200 mm Compensation element possible Height: 80-240 mm Length: 6–18 m, Minimum miter length: 3 m Surface and tolerance of dimension planed on four sides as per profile drawing visible side finished ± 1 mm in width and height ± 3 mm length tolerance Wood moisture *up to cross section of 60,000 mm², protective coating required if close to the sea Mosser Leimholz GmbH, A-3263 Randegg +43 7487 62 71-0, office

Mechanical properties Strength class Shear modulus Bending strength Elasticity modulus Tensile strength Compressive strength

Ceiling elements visual quality visible side Features Glued joint open joint not permissible Tiny knots Solid dead knots occasionally permissible Rough areas Discoloration/red spalting individually permissible up to 5% of the surface Resin pockets Insect attack Bark inclusions Waney edge occasionally permissible Sound knots occasionally permissible Visible side facing down for production reasons. Individually wrapped or packaged in PE film. Store dry in a hall or under a roof. Protect from sunlight. Loose knots Mosser Leimholz GmbH, A-3263 Randegg +43 7487 62 71-0, office@mosser.at

Ceiling elements visual quality rear side Features Glued joint open joint permissible up to a depth of 1/6 of the component width per side Tiny knots Solid dead knots Rough areas permissible Heartwood Discoloration/red spalting Resin pockets Insect attack Bark inclusions Waney edge Sound knots Loose knots Individually wrapped or packaged in PE film. Store dry in a hall or under a roof. Protect from sunlight. Mosser Leimholz GmbH, A-3263 Randegg +43 7487 62 71-0, office@mosser.at

Ceiling elements industrial quality Type of wood according to EN 14080:2013 and EN 302/301 melamine/urea resin, Type 1, 90°C-B Service class 1, 2 and 3* as per EN 1995-1-1 Width: 600 mm and 1200 mm Compensation element possible Height: 80-240 mm Length: 6–18 m, Minimum miter length: 3 m Surface and tolerance of dimension planed on four sides as per profile drawing visible side finished ± 1 mm in width and height ± 3 mm length tolerance Wood moisture *up to cross section of 60,000 mm², protective coating required if close to the sea Mosser Leimholz GmbH, A-3263 Randegg +43 7487 62 71-0, office

Mechanical properties Strength class Shear modulus Bending strength Elasticity modulus Tensile strength Compressive strength

Ceiling elements industrial quality visible side Features Glued joint open joint not permissible Tiny knots Solid dead knots Rough areas individual minor rough areas permissible Heartwood Discoloration/red spalting Resin pockets Insect attack individual small wormholes up to 2 mm permissible Bark inclusions Waney edge occasionally permissible occasionally permissible Sound knots Visible side facing down for production reasons. Individually wrapped or packaged in PE film. Store dry in a hall or under a roof. Protect from sunlight. Loose knots Mosser Leimholz GmbH, A-3263 Randegg +43 7487 62...

Ceiling elements industrial quality rear side Features Glued joint open joint permissible up to a depth of 1/6 of the component width per side Tiny knots Solid dead knots Rough areas permissible Heartwood Resin pockets Insect attack Bark inclusions Waney edge Sound knots Loose knots Individually wrapped or packaged in PE film. Store dry in a hall or under a roof. Protect from sunlight. Mosser Leimholz GmbH, A-3263 Randegg +43 7487 62 71-0, office@mosser.at

Ceiling elements – groove profiles* Mosser Leimholz GmbH, A-3263 Randegg +43 7487 62 71-0, office@mosser.at

Imprint Mosser Leimholz Gesellschaft m. b. H. Company headquarters & postal address: Fohlenhof 2 A-3263 Randegg +43 7487 62 71-0 office@mosser.at Register court: District Court of St. Pölten Commercial register number: FN93662p Sales tax ID number: ATU20146606 Chamber affiliation: Member of the Austrian Wood Industries Association Legal notice: The information on the Internet regarding the Mosser Group is continuously checked and updated. Nevertheless, incorrect information may be included unintentionally. Therefore, liability or a guarantee for the topicality, correctness and completeness...