Superwool® XTRA Unifelt Product Data Sheet Product Description Superwool XTRA Unifelt is manufactured using our patented Superwool XTRA composition and technology. Our newest innovation does not form respirable crystalline silica and is designed to offer excellent performance in demanding high temperature applications. Excellent flexibility and very good dimensional resilience after compression and make utilisation of the boards or cut pieces very easy where rigid products are unsuitable. Additionally, Superwool XTRA Unifelt is supplied in a range of thicknesses featuring a light weight, high heat resistance, low thermal conductivity with high sound absorption properties. Superwool XTRA Unifelt is bonded with an organic binder which begins to burn out on exposure to 180-200°C (356-392°F). Ingot insulation Expansion gaskets Back-up insulation Veneering modules Excellent thermal stability results in reliable and consistent thermal insulating performances: ◦ ◦ Low heat storage High thermal coefficient of expansion to counteract shrinkage in operation Excellent thermal stability with time Immune to thermal shock Does not form crystalline silica when exposed to high temperatures Excellent resistance to chemicals and pollutants, especially alkali metals Resistant to water and steam Good sound absorption Excellent tensile strength results in: ◦ Strong resistance to tearing Excellent flexibility Easily die-cut to form complex shapes for high temperature gasketing Environmental & Health Safety Superwool low biopersistent fibres manufactured by Morgan Advanced Materials are not classified as carcinogenic by IARC or under any national regulations on a global basis. They have no requirements for warning labels under GHS (Globally Harmonised System for the classification and labelling of chemicals). In Europe, Superwool fibres meet the requirements specified under Note Q of European Regulation EC/1272/2008 (on Classification, Labelling and Packaging of substances and mixtures). All Morgan Advanced Materials Superwool low biopersistent fibre products are therefore exonerated from classification and labelling as hazardous in Europe. Publication Date: 23 August 2021 Code: FL.10 1 of 2 www.morganthermalceramics.com Email: [email protected] Thermal Ceramics is a b

Superwool® XTRA Unifelt Product Data Sheet Superwool XTRA Unifelt Density, kg/m (pcf) Modulus of Rupture, MOR, MPa (psi) Linear Shrinkage, %, EN 1094-1 1450°C (2600°F) Chemical Analysis, % weight basis after firing Alumina, Al2O3 Thermal Conductivity, W/m•K (BTU•in/hr•ft ), per ASTM C201 400°C (752°F) Product Availability Superwool XTRA Unifelt are manufactured in Europe. Quantity of boxes per pallet 20 The boards in standard size 1000mm x 500mm (39.37in x 19.7in) are packed in cartons or shrink film wrapped pallets. Other sizes or die cut pieces can be made available upon request (subject to...