Catalogs >
Moreda Riviere Trefilerías >
Safety Light System

Safety Light System
2Pages

Catalog excerpts

MRT® SAFETY LIGHT SYSTEM NEW! CHARACTERISTICS PANEL Ø 4mm steel galvanized hard wire (according to EN 10244-2 standard) and powder coated. Hot dipped galvanized: 35 gr/m2 minimum Mesh: 150 / 200 x 20 mm. Heights: 1.355 / 1.855 mm. Lenght: 1.500 mm. POST Already drilled post with rivet nut for an easy and safe installation. Steel galvanized sheet according to EN 10142 standard Hot dipped galvanized: 70 gr/m2 minimum Section: 60 x 40 x 1,50 mm. INTERMEDIATE POST: with 4 Ø 11 mm holes in a face of the post. ANGLE POST: with 6 Ø 11 mm holes in 2 adjacent faces of the post. Resistance I/V: 4,72 cm3. Welded base with four pre-drilled holes . Post height: 1530 / 2030 mm. FIXATION SYSTEM Captive screws with retaining washers. The screws are retained in the post IMPACT TEST The panels, posts and fixation system have been tested according to the recommendations on the impact tests described in ISO 14120:2015 Annex C. The system has resisted 800 joules impact.

Open the catalog to page 1

Fully adaptative panel, it can be custom cutted Distance between axles: 1.525 mm (+/-10 mm) FINISHING FEATURESPOWDER COATED 10 standard RAL colours: More than 200 RAL possible colours Polyester powder coating by microcrystalline phosphatation. 1 or 2 leaf swing door Mesh: 150 / 200x20 mm. Pre welded base posts. Safety lock

Open the catalog to page 2

Safety Light System 2Pages

Catalog excerpts

All Moreda Riviere Trefilerías catalogs and technical brochures

Safety Light System
2Pages