Unequal angles - standard

Product catalog summary

Overview: This document from Montanstahl AG provides specifications for unequal leg angles, adhering to European standards EN 10056-1, EN 10056-2, and EN 10088-3: 1D. It includes detailed dimensions, weights, and manufacturing notes for various profiles.

Specifications: The unequal leg angles are manufactured in compliance with EN 10056-1 for dimensions, EN 10056-2 for tolerances, and EN 10088-3 for material grade 1D. The document lists dimensions in millimeters (mm) and weights in kilograms per meter (kg/m).

Dimensions and Weights: The document provides a comprehensive table of dimensions and weights for various unequal leg angles. Key parameters include height (h), base (b), thickness (t), and radii (r1 and r2). Weights are specified for each profile, indicating the mass per meter length.

Manufacturing Notes: Some profiles are laser fused, ensuring full penetration equivalent to hot-rolled profiles. The document notes that radii r1 and r2 are approximate. For certain dimensions, a minimum rolling quantity of 40 tons is required.

Key Observations: - Profiles range from 20x10x3 mm to 200x100x15 mm. - Radii are indicative and vary slightly across profiles. - Laser welding is used for specific profiles, providing sharp corners and full penetration.

Catalog excerpts

In accordance with EN 10056-1, tolerances according to EN 10056-2, grade according to EN 10088-3: 1D Cornières à ailes inégales Conformes à EN 10056-1, tolérances selon EN 10056-2, nuance selon EN 10088-3: 1D Ungleichschenkliger Winkelstahl Gemäß EN 10056-1, Toleranzen nach EN 10056-2, Güte nach EN 10088-3: 1D Désignation Designation Bezeichnung Poid Weight Gewicht MONTANSTAHL AG Via Gerrette 4 CH – 6855 Stabio Rayons r1 et r2 sont indicatives. Radien r1 und r2 sind indikativ.

Open the catalog to page 1

Open the catalog to page 2

In accordance with EN 10056-1, tolerances according to EN 10056-2, grade according to EN 10088-3: 1D Cornières à ailes inégales Conformes à EN 10056-1, tolérances selon EN 10056-2, nuance selon EN 10088-3: 1D Ungleichschenkliger Winkelstahl Gemäß EN 10056-1, Toleranzen nach EN 10056-2, Güte nach EN 10088-3: 1D Désignation Designation Bezeichnung Poid Weight Gewicht * Profiles are laser fused. Full penetration, equivalent to hot rolled . r1 = laser welded seam, r2 = sharp corner ° To roll this size a min. quantity of 40 tons is required. + Radii r1 and r2 are approximate. MONTANSTAHL AG Via Gerrette...

Open the catalog to page 3

Unequal angles - standard

Unequal angles - standard

Catalog excerpts

All Montanstahl catalogs and technical brochures